Font Size: a A A
Keyword [Cooling rates]
Result: 1 - 20 | Page: 1 of 2
1. Microstructure Of Za48 Alloy. Micro-alloying And The Effect Of Different Cooling Rates, The Performance Study
2. Controllable Preparation And Property Optimization Of Mg2(Si,Sn) Based Thermoelectric Materials
3. Separation Of Intermetallic Compounds In The Microstructure Of Eutectic Sn-Ag-Zn Solder Solidified At Different Cooling Rates
4. Influence Of Cooling Rates On Microstructure And Properties Of Zn-4Al-3Mg Alloy
5. Influence Of Cooling Rates And Aging On Microstructure And Properties Of Ag-24.5In Alloy
6. Influence Of Cooling Rates On Microstructure And Properties Of Zn-4al-3mg Alloy
7. Experimental Study And Numerical Simulation On The Varying Cooling Rates Crystallization Kinetics Of Polymer
8. Exploitation And Research Of Microstructure And Properties Of V-Ti-N Microalloyed Steel For Fracture Splitting Connecting-Rods
9. Numerical And Experimental Study Of Hybrid Laser-GMA Welding Of Low Alloy Steels
10. Effects Of High Magnetic Field On Abnormal Microstructure Of High Purity Fe-1.1%C Alloys
11. Microstructure And Properties Of Aluminum-Silicon Alloy Prepared By Rapid Solidification
12. Investigation On Microstructure And Corrosion Behaviour Of Sn-0.3Ag-0.9Zn Solder Solidified With Different Cooling Rates
13. Study On Alloy Carbides Control In High Speed Steel
14. Effects Of Homogenization Cooling Rates On Hot Deformation Behavior Of Al-Cu-Mg-Zr Alloy
15. Effects Of Cooling Rates And Following Aging Process On The Microstructures And Precipitation Behavior Of Zr-Sn-Nb Alloy
16. Effect Of Cooling Rates On The Carbide Characteristics Of M42 High-Speed Steels
17. Effect Of Cooling Rates On Microstructure And Properties Of Aluminum Alloy
18. The Influence Of Annealing Temperatures And Cooling Rates On The Transformation Microstructural And Textural Characteristics Of Ti-6Al-4V Sheet
19. Study On Solid-state Phase Transition Of Three Typical Iron-based Alloys At Different Cooling Rates
20. The effect of process variables on microstructure in laser-deposited materials
  <<First  <Prev  Next>  Last>>  Jump to