Cu alloys - Globe Thesis

Keyword [Cu alloys] Result: 1 - 20 \| Page: 1 of 8
1.	Composition Design And Properties Of The Zr-Al-Ni-Cu Bulk Metallic Glasses
2.	Systemically Study Of Au-Cu Alloy System
3.	Laws And Mechanisms For The Effects Of Pr_xO_y On The Microstructures And Properties Of The Cast Al-Cu Alloys
4.	Basic Investigation On The Phenomenon Of Severe Plastic Deformation Induced Re-dissolution Of Precipitated Phases At Low Temperature And Its Application
5.	Solidification Behavior Of Spray Deposited Al-Zn-Mg-Cu Alloys And Their Microstructural Evolution During Thermal Processing
6.	Morphological Evolution During Directional Solidification Of AL-CU Alloys
7.	The Research About The Quench Induced Precipitation And Quenching Sensitivty Of Al-Zn-Mg-Cu Alloys
8.	Study On Strengthen And Toughening Mechanism Of Al-Cu Alloys Casts Formed By Squeeze Casting
9.	Study On Die Casting Technology Of High Strength And High Toughness Al-Cu Alloys
10.	Study On High-strength And Toughness Aluminum Alloys Formed By Indirect Squeeze Casting
11.	Research On The Microstructures And Mechanical Properties Of The Al-Cu Alloys Fabricated By The Solid-Liquid Mixed Casting Technology
12.	Research On Primary Dendritic Spacing Under Unidirectional Solidification Of Al-Cu Alloys
13.	A Study On Production Processes And Properties Of Copper Alloys With High Strength And High Conductivity
14.	Effect Of Rare Earth On Oxidation Performance Of Cu Alloys For Lead-frame
15.	Oxidation Of Cu-alloys At High Temperature
16.	Investigation Of Effects Of Electrical Field And Elements(Fe And Co) On The Wettability Of Copper On Tungsten
17.	Double Aging Peaks Phenomenon Of Al-Si-Mg Alloys And Electrochemical Characterization On Age Of Al-Cu Alloys
18.	Study On Microstruture And Properties Of 7150 Alloy During Heat Treatment
19.	Fabrication Of W-Cu Materials By Warm Compaction And Powder Injection Molding
20.	The Influences Of Ageing Treatments And Cu Contents On The Microstructures Of AlMgSi (Cu) Alloys
<<First <Prev Next> Last>> Jump to