Cutting model - Globe Thesis

Keyword [Cutting model] Result: 1 - 20 \| Page: 1 of 3
1.	Study Of Experiment And Modeling And Control Under Hard-Dry Cutting
2.	The FEM Simulation Of High Speed Milling Based On Orthogonal Cutting Model
3.	Study On The Key Technologies Of Dynamic Physical Simulation For Machining Process Based On Finite Element Method
4.	Study On Cutting Model For Abrasive Water Jet Based On Artificial Neural Network
5.	Study On Optimal Cutting Model Of Plate Wardrobe
6.	Research On The Safe And Efficient Blasting Technology Of Hard Rock Roadway With Large Section In Deep Coal Mine
7.	Study On Mechanism And Simulation During High Speed Machining Of Ultra High Strength40CrNi2Si2MoVA
8.	Research On High Speed Face Milling Cutter Based On System Dynamic Design Technology
9.	Based On Phase Turbocharger Abrasive Water Jet Cutting Machine Cutting Model Study
10.	The Cutting Mechanic Modeling And Experiment Research Of Metallic Glass Based On M-C Yield Criterion
11.	Cutting Model Of ASJ Based On Fuzzy Relation
12.	Modeling Of Shear Angle Calculation Based On Minimumof Plastic Deformation Energy
13.	Research On The Machinability In High Speed Machining Of Powder Metallurgy Material
14.	Study On Controlling Cutting Quality Of WEDM
15.	The Numerical Simulation Research Of High Speed Cutting Based On Oblique Cutting Model
16.	Research And Application Of Merchant Cutting Model Based On The Unequal Division Shear Zone
17.	Cutting Force Modeling Based On Oblique Cutting Model In Hard-machined Material Curved Cutting Process And Cutting Parameters Optimization
18.	The Macro And Micro Simulation Of Cutting Carbon Fiber Reinforced Plastic Composites
19.	Cutting Simulation And Experiment Research Of Grooved Insert In Turning Process
20.	Casting Spout High-pressure Water Jet Cutting Methods Research Design And Cutting Machine
<<First <Prev Next> Last>> Jump to