Deformation mode - Globe Thesis

Keyword [Deformation mode] Result: 21 - 38 \| Page: 2 of 2
21.	Research On Dependence Of The Evolution Of Grain Boundary Structure On Grain Size And Deformation Conditions In 304 Austentic Stainless Steel
22.	Investigation Of The Plastic Deformation Of Metallic Glasses By Atomistic Simulations
23.	Growth Behavior,Mechanical Property And Low-temperature Resistivity Of MgZnCa Metallic Glass Thin Films
24.	Study On The Influence Of Cell Wall Material’s Strain Hardening Effect On The In-plane Mechanical Properties Of Honeycombs
25.	Analysis Of In-Plane Mechanical Behaviors Of I-Beam Honeycomb
26.	Fabrications And Properties Of La-based And Zr-based Metallic Glass Thin Films
27.	Study On Energy Absorption Characteristics Of Porous Structure Based On 3D Printing
28.	Comparison Of In-plane Impact Deformation And Energy Absorption Characteristics Of Aluminum Honeycomb Material With Wall Thickness Gradient
29.	Study On Mechanical Properties Of A Curved Edge Concave Multi-cell Structure With Negative Poisson’s Ratio Effect
30.	Study On Evolution Rule Of Carbides In High Speed Steel M2
31.	Mechanical Properties And Biocompatibility Of Ti-Mo-O Alloys For Spinal Fixation Devices
32.	Study On The Effects Mechanism Of Deformation Modes On The Microstructure And Corrosion Behavior Of 316L Stainless Steel
33.	Investigations On Compression And Tension-Tension Fatigue Behaviors Of Coarse-grained Cu-Ni Alloys With High Stacking Fault Energies
34.	Study On Warm Forming And Springback Of Drawing-Flanging Of High Strength Steel Sheet With Center-Hole
35.	Research On Crash Characteristics Of Typical Aircraft Fuselage
36.	Study Of Controllable Preparation And Compressive Energy Absorption Properties Of Graded Aluminum Foam
37.	Phase Precipitation Behaviors And Plastic Deformation Modes Of β-type Ti-Mo Alloys
38.	Study On Impact Mechanical Response And Failure Mechanism Of High-strength Closed Cell Aluminum Foam
<<First <Prev Next> Last>> Jump to