Drag Model - Globe Thesis

Keyword [Drag Model] Result: 1 - 20 \| Page: 1 of 2
1.	A DEM Numerical Investigation On Dry And Wet Particles Mixing In Rectangular Spouted Bed
2.	Numerical Analysis On Combustion Characteristics Of Refuse Derived Fuel In Fluidized Bed
3.	The CFD Applied Basic Research Of Two Typical Polydisperse Gas-solid Fluidized Bed Reactor
4.	Study On The Experimental Platform System Of The Mine Vehicle Power Transmission
5.	Experimental Study Of Surfactant Effect On Motion Characteristic Of Single Bubble
6.	Development Of Torque Clutch Drilling Tool And Evaluation Of Drag Reduction Performance
7.	Simulation Of Circulating Fluidized Beds And Research On Transfer Coefficient-based Structural Parameters Method
8.	Numerical Study Of Drag Model And Gas-solid Flow Characteristics In Bubbling Fluidized Bed
9.	Numerical Simulation Of The Gas-solid Multiphase Flow In The Stripping Process Of Spray Granulation Tower
10.	Simulation And Research Of Airlift Internal Loop Bioreactor With Fluent
11.	Experimental Study And Simulation Of Gas-liquid Two-phase Flow In Stirred Tanks Using Dual-bubble-size Model
12.	EMMS-Based Drag Model And Extremum Analysis Of Energy Dissipation Rate For Fluidized Beds
13.	Hydrodynamic Simulation And Pyrolysis Kinetics In A Downer Pyrolyzer For Low Rank Coal
14.	Research On The Drag Force Model Of Nanoparticle Agglomerates Based On Fractal Dimension
15.	Numerical Simulation Of The Characteristics Of Nano Agglomeration Fluidization Process
16.	Simulation Of Gas-solids Flow And Mixing Of The Turbulent Fluidized Bed Of FCC Particles
17.	Study On Gas Hlod-up Fraction And Modei Of Three-pass Dividing Wall Column
18.	Numerical Simulation Of Flow Characteristics In Circulating Fluidized Bed
19.	The Investigation And Application Of CFD-PBM Corrected Drag Model In Bubble Column Reactor
20.	Two-fluid Model Simulation Investigation On Particle Flow Behaviors And Emissions Control In A Gas-solid Fludizied Bed
<<First <Prev Next> Last>> Jump to