Hard turning - Globe Thesis

Keyword [Hard turning] Result: 21 - 40 \| Page: 2 of 3
21.	Research On Formation Mechanism Of Chip And Surface Integrity In Hard Cutting Hardened Steel
22.	Investigation Of White Layer And Residual Stress During Hard Turning Of Hardened Steel
23.	Simulation Study On Residual Stress Of Cr12MoV Surface In Dry Hard Turning
24.	Study On Hard Turning Technology Of Planet Roller Screw Thread
25.	Research On The Deviation And Surface Integrity Of Thin-wall Bearing Rings In Hard Turning
26.	Study On The Surface White Layer And Plastic Strain Of Hard Turning Hardened Steel
27.	Research On The Precision Hard Turning Of Thin-Wall Bearing Rings
28.	Microstructure And Mechanical Properties Of Laser Cladded 316L Stainless Steel By Hard Turning(HT)and Ultrasonic Surface Rolling(USR)
29.	Study On The Surface Integrity Of 18CrNiMo7-6 Steel In Hard Turning
30.	Research On The Influence Of Tool Wear Effect On Hard Turning Process
31.	Experiment And Analysis Of Physical Properties Of Bearing Ring Surface Based On Nitrogen Jet Hard Turning
32.	A micromechanics based simulation and experimental approach to predict surface integrity in precision hard turning
33.	Optimization of three-dimensional surface topography in hard turning
34.	Microstructural prediction in metal cutting and improvement of machinability and surface integrity via laser-assisted machining
35.	The prediction of chatter stability in hard turning
36.	Thermal modeling for finish hard turning
37.	Methods for improving chucking accuracy of a cylindrical workpiece in finish hard turning
38.	Tool wear, surface quality, and chip formation in continuous and interrupted hard turning
39.	Predictive modeling of tool wear rate with application to CBN hard turning
40.	An investigation into the effects of hard turning surface integrity on component service life
<<First <Prev Next> Last>> Jump to