Injection - Globe Thesis

Keyword [Injection] Result: 141 - 160 \| Page: 8 of 10
141.	Regulation Of Microfluids On Microfluidic Chips By Thermal Responsive Poly (N-isopropylacrylamide) Monolithic Plug
142.	Some Key Technologies Of Product Digital Design Of Precision Plastic Injection Moulding Equipment And The Development Of An Integrated Platform
143.	Study On Differential Cylinder System Controlled With Variable Speed Pump And Technology Of Low-energy Injection Mokling Machine
144.	Study On The Luminescence Behavior Of Model Proteins With Active Components Of Chinese Medicine And Its Application
145.	Investigation On The Controlled Synthesis, Doping And Tailored Properties Of ZnO Nanostructured Materials
146.	Study On The Novel On-line Sample Preconcentration Techniques And New FI-CE System
147.	Modeling, Optimization And Control Of Water-Injection Oil-Driving System In Oil Field
148.	Studies On Improving Weld Lines In Molded Parts By Exploiting Sequential Injection Molding
149.	Interfacial Reaction Of Single Crystal Particulate Reinforced WC_p/Ti-6Al-4V Graded Composites Coating Produced By Laser Melt Injection
150.	Research Of Residual Stresses And Warpage Of Plastic Injection Molding Based On Surface Model
151.	Acceleration Approaches Of The Computation For Plastic Injection Molding Simulation
152.	On-line Optimization And Detection Of Process Parameters For Plastic Injection Molding Machine
153.	Studies On Microfluidic Chip-based Flow Injection Analysis System With Gravity-driven Flows
154.	Experimental Study And Application Of Inhibitory Effect On Gas Desorption Of Coal Seam Injected With Water
155.	Microfluidic Picoliter-Scale Translational Spontaneous Sample Introduction And Its Application In High-Speed Capillary Electrophoresis
156.	Study On Mechanism Of And Prevention And Control Measures Against Casing Failure Of Heavy Oil Thermal Recovery Wells In Gudong Oil Field
157.	Research On Variation Mechanism Of Reservoir Parameter Under The Condition Of Layered Water Injection And Dynamic Allocation Method Of Injection Allocation Parameters
158.	Physical Mechanical Study On Mech-electro-magnetic Coupling And Function Modulation In Quasi-one Dimensional Nanomaterials
159.	Injection And Correlation Analysis
160.	The Gas Injection To Improve Oil Recovery Of Optimal Control Theory, Methods And Implementation
<<First <Prev Next> Last>> Jump to