Metamorphic layer - Globe Thesis

Keyword [Metamorphic layer] Result: 1 - 20 \| Page: 1 of 1
1.	Surface Integrity And Deformation Forecasting In High Speed Cutting Titanium Alloy Thin-walled Component
2.	Surface Quality Study Of Sapphire Crystal Grinded By Electrolytic In-Process Dressing (ELID) Method
3.	Research On The Surface Quality Of Turbine Blade 1Cr13 By Wedm
4.	Research On The Hardened Mould Steel Machined Surface Metamorphic Layer
5.	Machined Surface Integrity For Nickel-Based Superalloy In High-Speed Milling
6.	The Research Of Composite Processing Technology Of The Oil Casting Using Micro-edm And ECM
7.	Thin-walled Beam Mirco-milling Process Of Flexible Component
8.	Study On High Speed Milling Of Hardened Steel Surface Quality Based On Service Performance
9.	Phase Transformation Of Chip And Machined Surface Integrity Of Hard Milled H13 Steel
10.	Study On Microstructure And Wear Resistance Of The Metamorphic Layer Of GCr15 Bearing Steel In Hard Cutting
11.	Research On EDM Forming Hole Of Monocrystalline Silicon And Damaged Layer Removal
12.	Research On Plasma Characteristic And Removal Mechanism Of PCD In Electrical Discharge Machining
13.	Study On The Influence Of The Incident Angle Of Post-Mixed Water Jet On The Surface Metamorphic Layer Of 18CrNiMo7-6
14.	Microstructure Evolution Of Cutting Metamorphic Layer Of H13 Steel Based On Plastic Deformation Mechanism
15.	Machined Surface Integrity For Iron-Based Superalloy In High Speed Milling
16.	Study On Characterization And Fatigue Behavior Of Surface Metamorphic Layer Of 18CrNiMo7-6 Alloy Steel
17.	Investigation On Microstructure Distribution Of Strengthened Ground Workpiece's Metamorphic Layer And Its Surface Integrity Coupled With System's Dynamic Factor
18.	Research On Testing Method Of Plastic Parameters Of Surface Metamorphic Layer Based On Scratch Technique
19.	Research On Atomization EDM Ablation And Electrochemical Composite Milling Machining
20.	Research Of Machined Surface Quality And Metamorphic Layer Characteristics Of Contour Bevel Gears
<<First <Prev Next> Last>> Jump to