Plastic flow - Globe Thesis

Keyword [Plastic flow] Result: 21 - 40 \| Page: 2 of 4
21.	Plastic Metal Flow Behavior And Microstructure For Rotating Friction Welding
22.	Physical Modelling Of The Plastic Flow In The Friction Stir Welds
23.	The Influence Of Plastic Flow On The Weld Formation Of Linear Friction Welding For Titanium Alloy
24.	Study Of Volume Effect On The Plastic Flow Behaviors Of Metal
25.	The Influence Of Soft Constraint On The Welding Plastic Metal Flow Of Friction Stir Welding
26.	Plastic Behavior Of Metals Under Tension-Torsion Loading
27.	The Influence Of Pin Shapes And Temperature Field On The Welding Metal Flow Of FSW For Thick Aluminum
28.	Effect Of Shoulder Geometry On Plastic Metal Flow, Microstruture And Properties Of Friction Stir Welding
29.	Heat Treatment Of 37CrMnMo Oil Drill Pipe And Joint Performance Of Friction Welding
30.	Dynamics Of Two-dimensional Active Colloids
31.	Study On Friction Stir Welding Process And Weld Metal Migration Behavior Of Particle Reinforced Aluminum Matrix Composites
32.	Fatigue Damage And Dilatancy Properties For Salt Rock Under Discontinuous Cyclic Loading
33.	Experimental Study On Subsequent Yield Surface Evolution Of Nodular Cast Iron
34.	Fabrication And Properties Of Ti-Cu And Cu-Cu Laminated Composites By Ultrasonic Consolidation
35.	Experimental Investigation On The Sandstone Permeability Under Plastic Flow
36.	Material Flow Behavior In The Friction Stir Weld Of Aluminum Alloy Thick Plates
37.	Numerical Analysis Of Thermo-mechanical Coupling Process In Linear Friction Welding Of Ni-based Superalloy
38.	Studying The Plastic Flow Mechanical Behaviors Of Glassy Materials Under Different Conditions
39.	Experimental Study On Permeability Evolution Of Coal Samples Under Plastic Flow
40.	Analysis Of The Temperature Flied And The Material Flow In Friction Stir Spot Welding For AZ31 Magnesium Alloy
<<First <Prev Next> Last>> Jump to