Font Size: a A A
Keyword [Precipitated phase]
Result: 141 - 158 | Page: 8 of 8
141. Effect Of Forced Cooling On Microstructure Properties Of Fine-grained 7075 Aluminum Alloy Friction Stir Welding
142. Study Of The Effect Of Cu And Reversed Austenite On Corrosion Performance Of Low Carbon Stainless Steel
143. Interface Characteristics Of Element Doped Mg Matrix And Its Precipitated Phase
144. Effect Of Carbon And Nitrogen Content On Microstructure And Properties Of High Nitrogen Martensitic Stainless Bearing Steel
145. Effect Of Aging And Si On Precipitated Phase And Mechanical Properties Of Cast Al-5Cu Alloy
146. Study On Warm Forming Process Of 7075-T6 Aluminum Alloy Based On Contact Heating
147. Precipitation Regulation And High Temperature Mechanical Properties Of Al-Cu Alloys Deposited By Micro-Rolled Wire-arc Additive Manufacturing
148. The Effect Of Rapid Heat Treatment On The Microstructure And Mechanical Properties Of Q960 Steel
149. Design And Microstructure Transformation Law Of Zr-and Ag-Controlled Al-Cu-Mg-Mn-Zn Alloy
150. Effect Of Rolling And Annealing Process On Corrosion Resistance Of 0Cr17Ni13Mo5 Stainless Steel
151. Effect Of Heat Treatment On The Microstructure And Mechanical Properties Of W-Containing Nickel Based Superalloys
152. Study On Microstructure And Mechanical Properties Of Cu-15Ni-8Sn-xMo Alloy
153. Simulation Study On The Effect Of Alloy Elements On The Interface State Of Austenite/Precipitated Phase
154. Effect Of Cu And Al Content On Microstructure And Properties Of FeCrMnAlCu High Entropy Alloy
155. Basic Research On Microstructure And Properties Control Of Metal Solidification Process Based On Permanent Magnet Stirring
156. Influence Of Y And Ce Elements On Microstructure Control And Laser Welding Performance Of Ti6Al4V Alloy
157. Effects Of Thermal Aging On Microstructure Evolution And Properties Of Austenitic Stainless Stee
158. Study On Rheological Behavior And Strengthening-toughening Mechanism Of XTiB2/Al-17Si-4Cu Composite
  <<First  <Prev  Next>  Last>>  Jump to