Font Size: a A A
Keyword [Pull-out]
Result: 1 - 20 | Page: 1 of 5
1. Research On The Characteristics And Dam Stability Of Fine Grained Tailings
2. Research On Interfacial Damage And Failure Mechanisms For The SiC Fiber-Reinforced Composites
3. Study Of The Strength And Tightness Of Tube-to-Tubesheet Connection Joints
4. Study On Viscoelastic Behavior Of Plastic Pipe Reinforced By Cross-Winding Steel Wire
5. Interfacial Mechanical Properties Of Shape Memory Alloy Composite
6. The Application Of Pre-Allioyed Powder In Diamond Saw Blade
7. Study On The Tearing Strength Of PU Coated Fabrics
8. Deep-cut Vacuum Distillation Of Atmospheric And Vacuum Distillation Unit
9. Study On Deep-cut Of Fuel-type Vacuum Distillation Unit
10. The Experimental Study On Interface Properties Between Geogrid And Grain Tailing And Numerical Analysis
11. Experimental Study For The Tense And Pull-out Of Knotted Shape Memory Alloy Fiber-Reinforced Composite Materials
12. Study On The Impact Of Flexible Pressurized Anchor's Structure Parameters And Wall Rock Pressure On Anchoring System
13. Development Of Simulation And Analysis System Of Single Fibre Pull-Out Test Based On VC++ And ANSYS
14. Mechanism Research On Expanding Connection Between Tubesheets And Tubes In Heat Exchanger
15. Study On The Flexible Pressurized Anchor's Structure And Performance
16. Analytical And Experimental Study On Pull-out Load Transfer Mechanism Of Anchor
17. Experiment And Finite Element Analysis Of Cord Pull Out Process
18. Fabrication Of Al2O3/Ti(C, N) And Si3N4 Cutting Tool Materials
19. Study On Roadway Supporting Design Based On Bolt Pull-out Test
20. Study On The Basalt Fiber Critical Length And The Performance Of Basalt Fiber Reinforcing Wood-plastic Composite Material
  <<First  <Prev  Next>  Last>>  Jump to