Font Size: a A A
Keyword [Sintering]
Result: 21 - 40 | Page: 2 of 10
21. A Study On Interface And Compounding Mechanism Of Interfaces Of Polycrystalline Diamond Compacts
22. Study On The Structure And Microwave Dielectric Properties Of CaTiO3-based Ceramics
23. Study On The Synthesis Of Ternary Layered Machinable Carbide Ti2AlC
24. Study On The Combustion Behaviour Of Fe-Ti-C Systems Based On A Field Activation
25. Research On Ultrafine Grained Ti(C,N)-based Cermets
26. Sintering, Structure And Properties Of Nanosized ZnO Under Ambient And Ultra-High Pressure
27. Investigation On The Fabrication And Properties Of The Cu Base Composites With Low Friction And High Wear Resistance
28. Synthesis Of The High Strength Aluminum Alloys By Spark Plasma Sintering And Their Structures And Properties
29. Preparation Of Ti-Al-Al2O3 Nano-material By Mechanical Activation Sintering In Situ
30. Study On The Polymer Materials Of Selective Laser Sinteringand The Properties Of Sintered Parts
31. Technique Research On Powder Injection Molding Of Ti(C,N)-Based Cermets
32. Research On Nano-composite Materials Of Ti(C,N)-based Cermets
33. The Experiment And Optimization Approaches Research On Selective Laser Sintering Process
34. Numerical Simulation And Sintering Zone Prediction Of Direct Laser Sintering Of Multi-component Metal Powders
35. Stabilization Mechanisms And In-situ Coagulation Casting Of Alumina Slurry Dispersed In Silica Sol Without De-airing Process To Prepare Mullite Ceramics
36. Study On Preparation And Mechanism Of Metal-Ceramics Composite Powders And Their Applications
37. Research On Some Key Techniques For Selective Laser Sintering Of PS/Al2O3 Nano-composites
38. Preparation And Study On Microstructure And Electrical Properties Of ZnO-based Varistor Ceramics With High Voltage-gradient
39. Preparation Of Nanometer Tungsten-based Composite Powder And Study Of Properties For Its Alloys
40. Study On A PM Ti-Fe-Mo-Al Alloy For Automobile Use
  <<First  <Prev  Next>  Last>>  Jump to