Font Size: a A A
Keyword [Tools]
Result: 1 - 20 | Page: 1 of 10
1. The Research On Drilling Techniques Of Following The Geological Target While Drilling For Sandstone And Conglomerate Reservoir In Xin Jiang MoBei Oilfield
2. Study On The Methods Of Precision Modeling And Error Compensation For Multi-Axis CNC Machine Tools
3. Study On Residual Stresses And Distortion Theory Of Aeronautica Frame Structure In The Milling
4. Researches On Thermal Stability Of Diamond And Thermal Damages Of Its Tools
5. Study On The Kynematic Calibration And The Open CNC System Of The Hybrid Machine Tools
6. Study On Dynamics Analysis Method Of Parallel Mechanism In Serial-Parallel Machine Tools
7. Surface Modification Of Ceramic Cutting Tools By Energetic Ions
8. The Study And Design Of Controlling System Of Lower Speed Wire Electrical Discharge Machine Tools Beased On The Reconfigurable Theory
9. Research On Rare Earth Modification And Cutting Mechanism Of Die-Cast Magnesium Alloy AZ91
10. Research On The Geometric Error Measurement And Error Compensation Of The Numerical Control Machine Tools
11. Error Synthetic Compensation Technique And Application For NC Machine Tools
12. Study On The Wear-behavior Of Woodworking Tools For To Optimize Machining Wood
13. Simulation Study On Microstructure Evolution Of Ceramic Tool Materials During Fabrication
14. Design And Development Of ZrN Coated Tools And Study On Its Cutting Performance
15. New Methods Of Thermal Reeor Modeling For NC Machine Tools And Their Researchment And Application
16. Study On Structure Of Reaming While Drilling Tools And Design Of Suitable Bottom-Hole Assembly
17. Research On Magnetic Flux Leakage Testing Methods For Petroleum Pipe Tool Thread
18. Modelling And Compensating For The Comprehensive Geometric Errors Of NC Machine Tools
19. Research On Cutting Performance And Wear Failure Mechanism Of Graded Coating HSS Tools
20. Study On Modal Analysis & Optimization Of Measuring Points & Modeling Technique For Thermal Errors Of CNC Machine Tools
  <<First  <Prev  Next>  Last>>  Jump to