Font Size: a A A
Keyword [Trip]
Result: 181 - 200 | Page: 10 of 10
181. Research On Function Safety Of Heterogeneous Redundant Systems With KooN Configuration
182. Research On Microstructural Control And Strengthening-toughening Mechanismof Novel Heterogeneous Cold Rolled Medium Manganese Steel
183. Analysis Of Coiled Tubing Trip-ability In Three-dimensional Bent Wellbores And Improvement Design Of CT Tractor
184. Microstructure Evolution And Energetic Structural Properties Of NbZrTiTa High-entropy Alloy
185. Study On Microstructure And Properties Of Al-containing Medium Manganese TRIP Steel Under Intercritical Annealing
186. Study On Microstructure Evolution Behavior Of Nb-containing Manganese TRIP Steel During Critical Annealing
187. Micro-structure And Properties Of Nitrogenous Austenitic Stainless Steel By Laser Cladding
188. Effect Of Deformation Conditions On Martensite Transformation Behavior In Lean Duplex Stainless Steel
189. Phase Transformation Behavior,Microstructure And Mechanical Properties Of Aluminum-containing Medium Manganese Steel With Low Manganse Content
190. Control Of Microstructure And Mechanical Properties Of Low-carbon And Low-alloy High Strength Automobile Steel
191. Research On Microstructure Evolution And Mechanical Properties Of High-Strength Medium Mn Q&P Steel
192. Study On Microstructure Evolution And Properties Of 0.13C-5Mn-1Al Steel During Heat Treatment
193. Study On TWIP/TRIP Effect Of Fe50Mn30Co10Cr10 System High Entropy Alloy Via Mo And C Alloying
194. The effect of phase morphology and volume fraction of retained austenite on the formability of transformation induced plasticity steels
195. Titanium by design: TRIP titanium alloy
196. High strain rate behaviour of multiphase transformation induced plasticity (TRIP) steels
197. Microstructural effects on the stability of retained austenite in Transformation Induced Plasticity steels
198. Computational design and analysis of high strength austenitic TRIP steels for blast protection applications
199. Investigation of the mechanical behaviour of TRIP steels using FEM
200. Development of thermo-mechanically reliable lead-free solder alloys
  <<First  <Prev  Next>  Last>>  Jump to