aluminum foam - Globe Thesis

Keyword [aluminum foam] Result: 1 - 20 \| Page: 1 of 10
1.	Experimental Study And Numerical Simulation On Bubble-melt Two-phase Flow With Gas Injection And Mechanical Stirring Relevant To The Aluminum Foam Processing
2.	Experimental Study And Theoretical Analysis On The Dynamic Properties Of Foamed Aluminum Alloys
3.	Research On Several Problems Of Air-blast Protection
4.	The Mechanical Behavior Of The Double Tube Structure With Aluminum Foam Core
5.	Research On Properties And Fabrication Technique Of Aluminum Foam With Press-Dissolution-Vacuum Sintering Progress
6.	Fabrication Of SiC Particle-Reinforced Aluminum Foam Cylinder Sandwich And The Study Of Its Mechanical Property
7.	Study On Preparation Of Pure Aluminum Foam
8.	Experimental Study On Mechanical Properties Of The Open-cell And Closed-cell Aluminum Foams
9.	Structural Characteristics And Mechanical Property Of A Closed-cell Aluminum Foam
10.	Preparation With Aluminum Foam Of Sandwich Beams And Sandwich Tubes And The Study Of Mechanical Property
11.	Study On Indentation Deformation Mechanical Behavior Of Open-cell Aluminum Foams
12.	Research On Process And Properties Of Open Cell Aluminum Foams By The Space-holder Method
13.	Study On Preparation Of Aluminum Foam Via Blowing Foaming Agent
14.	Study On The Preparation And Characteristics Of Organizations Of Al-Si Alloy Foam Which Viscosity Increased By SiC Particles
15.	Investigation On Compression And Bending Behavior Of Tubes Filled With Open-cell Aluminum Foam
16.	Study On Preparation Of Aluminum Foam Using Novel Foaming Agent Two Steps Foaming Process
17.	Metallurgy Bonding Of Closed-cell Aluminum Foam With Aluminum And Aluminum Alloy Plate
18.	Preparation Of Aluminum Foam And Its Compressive Properties Research
19.	Study On Recycling Of Scrapped Aluminum Foam And Heat Conduction Simulation In Aluminum Foam
20.	Simulation Of Aluminum Melt Foaming Process
<<First <Prev Next> Last>> Jump to