Font Size:
a
A
A
Keyword [blowout preventer]
Result: 1 - 20 | Page: 1 of 3
1.
Analysis On Mechanical Stability Of Subsea Wellhead And Bearing Capacity Of Conductor For Deepwater Drilling
2.
Theory And Application Study On Annular Kick-Control Technology Of Through-tubing Blowout Preventer In Downhole Operation
3.
Research On The Stress Corrosion Analysis And Mechanism For The BOP Steel In The Wet Environments Of H
2
S
4.
Research On BOP And Sealing Of The Snubbing Unit In Water Injection Well With High Pressure
5.
Research On On-off Flexible Seal System And Its Control Technique In Snubbing Service
6.
Research On Reliability Of The Ram Blowout Preventer
7.
An Investigation On LPC Rare Earth To Improve ZG25CrNiMo Performance Of Resisting H
2
S Corrosion
8.
Study On H
2
S-corrosion Resistance Of ZG25CrNiMo After Modified Inclusions By LPC Rare-Earths
9.
Safety Evaluation Of Annular Blowout Preventer
10.
The Design AndAnalysis Of Remove And Installation Device Of Inclined And Vertical Drilling Rig Wellhead Blowout Preventer
11.
Oil Well Blowout Preventer Monitoring, Data Storage And Alarm System
12.
CAE Modeling And Analysis Of Key Components For The Blowout Preventer Ram
13.
Structure Optimization And System Simulation Of Workover Blowout Preventer
14.
Safety Assessment Research On Blowout Preventer Shell Crack Defects
15.
Force Analysis Of End Effector Of Robot For Blowout Preventer Assembly And Study Of Dynamic Statics
16.
Risk Assessment Of Deepwater Drilling Riser And Subsea Blowout Preventer
17.
Control Algorithm And Simulating Design Of Ram Blowout Preventer Open And Shut Well
18.
Study On Sealing Performance Of Downhole Hollow Blowout Preventer
19.
Research On Acoustic Emission Detection And Signal Analysis Methods Of BOP
20.
Research On Reliability And Fault Diagnosis Methodology Of Subsea Blowout Preventer System
<<First
<Prev
Next>
Last>>
Jump to
