chip morphology - Globe Thesis

Keyword [chip morphology] Result: 41 - 57 \| Page: 3 of 3
41.	Research On Cutting Performance Of Ti-555Q High Strength Titanium Alloy
42.	Experimental Study On Preparation And Machining Of Ni60 Laser Cladding Layer
43.	Study On The Mechanism Of Ultrasonic Cavitation And Ultrasonic Vibration Combined Micro Drilling
44.	Research On Tool-chip Contact Characteristics Of Titanium Alloys For Quasi-intermittent Vibration Assisted Swing Cutting
45.	Vit1 Metallic Glass High-Speed Cutting Simulation And Experimental Research
46.	Research On Surface Integrity Of Inconel718 Nickel-based Superalloy Continuous Milling
47.	Simulation Of Cutting Force In Helical Milling Process And Its Application Study On The Influence Rule Of Machining Quality
48.	Machining Accuracy Evaluation And Process Optimization Of The Original Mold Of An Optical Functional Film With A Triangular Pyramidal Texture
49.	Material Removal Mechanism Of Laser-Assisted Micro-Milling TC4 Based On Chip Morphology
50.	Numerical Simulation And Experimental Study On Deep-hole Drilling Process Of Staggered Tooth BTA Drill
51.	Research On Tool-chip Friction Characteristics And Tool Wear Of GH4169 Under High-pressure Cooling
52.	Study On Tool Vibration Characteristics Under Different Chip Morphology
53.	Study On Chip Breaking Mechanism And Processing Technology Of Single Tooth BTA Deep Hole Drill For Slender Shaft
54.	Optimization Of Turning Process Parameters For Cast Steel Brake Discs Of High-Speed Trains
55.	Research On Chip Morphology Control And Fracture Morphology Of 50 Steel Internal Chip Removal Deep Hole Drilling
56.	Simulation Analysis And Experimental Research On Milling Of Titanium Alloy TC4
57.	Research On The Drilling Mechanism Of Deep Hole Vibration Drilling For Oxygen-free Copper Superconducting Wire Materials
<<First <Prev Next> Last>> Jump to