contact pressure - Globe Thesis

Keyword [contact pressure] Result: 21 - 40 \| Page: 2 of 4
21.	Research On Wear Mechanics Between Rod String And Oil Pipe In Vertical Beam Pumping Well
22.	Reseaech On The Wear Failure And Parametric Optimization Of Oil Extraction Use Single Progressing Cavity Pump
23.	Research On Sealing Performance Analysis Of Press-fitting Mechanical Connector And Optimal Design Of Connected Tool
24.	The Research Of Special Rubber-tube-expanding Process
25.	The Contact Pressure Analysis And Structure Optimization Of The Compressed Packer
26.	Study On Sealing Performance Of Casing Thread With Metal Seal Principle
27.	Contact Pressure And Piezoelectric Measurement In Sheet Metal Forming Process
28.	Feasibility Study On Completely Packer Sealing System And Slip Sleeve
29.	Study On Structural Parameter Optimization Of Hydraulic Packer
30.	Tool Wear And Contact Pressure Measurement In Sheet Metal Forming Process
31.	Research On The Optimization Design And Key Technologies Of Advanced Pultrusion System For Half Lenticular Tube
32.	Theory And Experimental Analysis About Sealing Property Of Clad Tubesheet Hydraulic Expanded Joint
33.	Research On Bimetal Tube Forming By Hydroforming
34.	Structure And Vibration Characteristics Analysis Of Shank-SFH-Tool System
35.	Design And Research Of Large Diameter Bridge Plug For Fracturing
36.	Study On Lifting Performance Of Epicycloid Type PCP
37.	Nonlinear Finite Element Analysis Of Periodic Contact Between Stator And Rotor Of Progressing Cavity Pump
38.	Fretting Fatigue Behavior Of 6061 Aluminum Alloy Under Cyclic Contact Pressure
39.	Experimental And Finite Element Analysis Of Mechanical Polishing Of Reaction Bonded Silicon Carbibe (SiC)
40.	Study On Contact Surface Grouting Pugging Technology Of Single-layer Shaft Lining
<<First <Prev Next> Last>> Jump to