cracking susceptibility - Globe Thesis

Keyword [cracking susceptibility] Result: 21 - 40 \| Page: 2 of 3
21.	Study Of Stress Corrosion Cracking Susceptibility Of Nickel-based Welds In Safe-end Dissimilar Metal Weld In Pressurized Water Reactor
22.	Study On Multi-field Coupling Numerical Simulation For DSP Thin Slab Continuous Casting Process And Hot Cracking Susceptibility Of A Hyperperitectic Steel
23.	Microstructures,Mechanical Properties And Defect Control Of Welding Joints Of Ni-based Superalloy For Skew Plate Frame
24.	A Study On Hot-cracking Sensitivity Of Mg-Zn-Y And Mg-Al-Ca Alloys
25.	Numerical Simulation Of The Effect Of Welding With Rapid Cooling On Hot Cracking Susceptibility Of Nickel-base Alloys
26.	The Research Of Rapid Cooling Process Effect Mechanism On Nickel-base Alloys Welding Hot Cracking Susceptibility
27.	Investigation On Ductility Dip Cracking Susceptibility Of Deposited Metal With New Type 690 Nickel Alloy Strip By Electroslag Cladding
28.	Effect Of Ca And Sm On Microstructure And Hot Cracking Susceptibility Of Mg-6Al-Zn-xCa-ySm Alloy
29.	Effect Of The Initial Microstructure Of GH4169 Superalloy On Microstructure And Properties Of Welded Joint
30.	Effects Of Cr On The Weldability And Oxidation Properties Of Novel γ’-strengthened Co-based Superalloys
31.	Development of a chromium-free consumable for joining stainless steels
32.	An investigation of the elevated temperature cracking susceptibility of alloy C-22 weld-metal
33.	Intermediate temperature grain boundary embrittlement in nickel-base weld metals
34.	Sulfide Stress Cracking Susceptibility of Low Alloy Steels for Casing Application in Sour Environments
35.	Stress corrosion cracking susceptibility of aluminum-base alloys 2195 and 2219
36.	Environmental cracking susceptibility of austenitic stainless steel alloys in acidified seawater
37.	EFFECT OF MICROSTRUCTURE, INCLUSION MORPHOLOGY AND COMPOSITION ON THE HYDROGEN-INDUCED HAZ CRACKING SUSCEPTIBILITY OF CAST AND WROUGHT CARBON-MANGANESE-SILICON STEELS (WELDABILITY, COLD, DELAYED)
38.	Study On Compositional Design,Microstructure And Properties Of Novel High Strength-toughness Al-Mg-Zn-Cu Aluminium Alloy With Good Weldability And Corrosion Resistance
39.	The Effect On Microstructure And Cracking Sensitivity Of Laser Cladding Coating By Substrate Preheating
40.	Study On Solidification Cracking Susceptibility Of Single-phase Austenitic Alloys During Laser Welding
<<First <Prev Next> Last>> Jump to