cross-wedge rolling - Globe Thesis

Keyword [cross-wedge rolling] Result: 61 - 80 \| Page: 4 of 5
61.	Numerical Simulation Of Forging Process And Microstructure Prediction For Knuckle Arm With 42CrMo Steel
62.	Study On The Forming Process And Microstructure Evolution On Cross Wedge Rolling Of The Shaft Parts
63.	Numerical Simulation Analysis Of Aluminum Alloy Connecting Rod Rough With Multi-Wedge Cross Wedge Rolling
64.	Straight Tooth Cylindrical Gear Wheel Rolling Based On The Principle Of Cross Wedge Rolling
65.	Numerical Simulation And Experimental Study On The Forming Process Of Metal Seal For Deep Well
66.	Study On Key Technology Of Forming Shaft End By Closed Cross Wedge Rolling
67.	The Finite Element Numerical Simulation On Composite Mechanism Of The Cross Wedge Rolling 42CrMo/Q235 Composite Shaft
68.	Experimental Research On Bonding Mechanism Of The Crosswedge Rolling 42CrMo/Q235 Composite Shaft
69.	The Research Of Jujube Arc Parts Cross Wedge Rolling Technology In Medium Temperature
70.	Numerical Simulation Of Roll Micro Cross Wedge Rolling Process Based On Multi Crystal Plasticity Model
71.	Study On Deformation Mechanism And Application Foundation On The Cross Wedge Rolling Without End Concavity
72.	The Study And Development Of The Release Agent Spraying System On Cross Wedge Rolling For Aluminum Alloy Forging
73.	Parametric Design And Numerical Simulation Of Asymmetric Cross-section Wedge Rolling Die
74.	Research On The Key Technology Of 40MnBH Hollow Shafts Using Cross Wedge Rolling With Mandrel Control Process
75.	Core Defects And Microstructure Control Mechanism For GH4169 Alloy Aero-blade Billet Subjected To Cross Wedge Rolling
76.	Effect Of Heat Treatment On Mechanical Properties Of 42CrMo/Q235 Cross-wedge Rolling Laminated Shaft Interface
77.	Study On Forming And Performance Uniformity Of Shaft Parts Of Closed Open Cross Wedge Rolling
78.	Study On Blanking Mechanism And Design Method Of Hot Shearing Mechanism For Cross Wedge Rolling Without Stub Bar
79.	Research On The Mechanism Of Compacting Voids In The Cross Wedge Rolling Shafts Based On The Floating-pressure Method
80.	Effects Of Process Parameters On Microstructure Of Workpiece In Closed-open Joint Rolling
<<First <Prev Next> Last>> Jump to