equiaxed - Globe Thesis

Keyword [equiaxed] Result: 21 - 40 \| Page: 2 of 3
21.	Microstucture Control And Performance Optimization Of Ti55531 Titanium Alloy
22.	Deformation Behavior Of GCr15 Bearing Steel After High-strain-rate Impact
23.	Sothermal Solidification Of Sn Alloy Through Pressure
24.	Study On The Superplasticity Of Powder Metallurgy Equiaxed Duplex γ-TiAl-based Alloy
25.	Phase-field Simulation Of The Growth Of Grains In A Binary Alloy During Phase Transformation
26.	Microstructure Control And Mechanical Property Optimization Of Laser Solid Formed TC21 Titanium Alloy
27.	Study On The Control Of Carbon Macro-Segregation For Large Round Bloom During Continuous Casting
28.	Research On Microstructure,Mechanical Properties And Casting Technology Of In-situ Titanium Matrix Composites
29.	Simulation Methodology And Behavior Of Dendritic Growth During Solidification Process Of Steel
30.	Influence Of Thermoelectric Magnetic Effect On The Columnar To Equiaxed Transition And Solidification Shrinkage During Solidifying Steel
31.	Technology For Control Of Equiaxed Grain Of B443NT Stainless Steel Continuous Casting Slab
32.	Three Dimensional Morphology And Nucleation Mechanism Of Intragranular Ferrite In Non-quenched And Tempered Steel
33.	Study On The Influence Of Solution Parameters On Microstructure Evolution Of TA19 Titanium Alloy And Mechanical Properties
34.	Research On The Formation And Improvement Of Corrugated Defects In W600 Slab
35.	Study On The Morphology And Formation Mechanism Of Microstructures In Al-Li Alloy Laser Welded Joints
36.	Numerical Simulation Of Equiaxed Crystal Nucleation And Growth Of Stainless Steel Under Vibration And Chill Conditions
37.	Effects Of Microstructure On Properties Of 316L Stainless Steel Coating Deposited By Low Pressure Plasma Spraying
38.	Microstructure Evolution And Process Optimization Of Additive Manufacturing TC4 Titanium Alloy Assisted With Ultrasonic Micro-Forging Treatment
39.	Microstructural investigations of the mechanisms of anisotropic grain growth in titania-doped alpha-alumina
40.	Mold behavior, heat transfer and quality of billets cast with in mold electromagnetic stirring
<<First <Prev Next> Last>> Jump to