finite element model - Globe Thesis

Keyword [finite element model] Result: 41 - 60 \| Page: 3 of 10
41.	Analysis Of The Static, Dynamic Character And Optimization Of The 960KW Drilling Pump Crankshaft
42.	Change Of Crustal Stress Caused By Mining And The Possible Failure Modes In Pillar Recovery
43.	Cross Wedge Rolling Molding Process Of Shaft Parts
44.	Research On Mechanism And Experiment Of Micro-abrasive Jet Machining
45.	Investigation Of Material Microstructure On Principles Of Manufacturing In Micro-Milling
46.	Simulation Of0Cr21Ni6Mn9N Stainless Steel Tube Section Quality In NC Bending Process
47.	Preparation And Performance Of The Metalized Ceramic Substrate For High-power Light Emitting Doxides (LED) Heat Dissipation
48.	The Study Of Mechanical Properties Of2d Triaxial Braided Composites
49.	Numerical Simulation Of The Heat Treatment And The Prediction Of Hardening Layer Of Low Carbon Steel Used In Big Gear Shafts
50.	Researches On Low-velocity Impact Damage Performance And Interface Characters Of Al-Al Explosive Welding Laminates
51.	Study On Quality Of CFRP Drilled With Brazed Diamond Core Drill
52.	Research On Updating Of Finite Element Model Of Offshore Jacket Platform And Analysis On Ultimate Bearing Capacity Of Platform
53.	Dynamic Analysis And Optimization Of Structure Of Spiral Bevel Gear Grinding Machine
54.	Hot Deformation Characteristics Of Lean Austenitic Heat-resistant Steel
55.	W-Cu Composites Prepared By Cold Spraying And Mechanical Performance Research
56.	Influence Of The Weld Line On Numerical Simulation Of Tailor-welded Blank Forming Process And Experimental Study
57.	Investigation Of Material Microstructure On Principles Of Manufacturing In Micro-milling
58.	Nolinear Finite Element Analysis For Radial Tire
59.	Throttle Structure Of The Flow Field Numerical Simulation Analysis
60.	Xk5025 Cnc Milling Machine Dynamic Design Of The Main Drive System
<<First <Prev Next> Last>> Jump to