Font Size:
a
A
A
Keyword [fracture criterion]
Result: 21 - 40 | Page: 2 of 5
21.
Resaerch On Fracture Criterion Of Polycarbonate Sheet
22.
Research On Building And Application Of Fracture Criterion In Hot Deformation Based On Accumulated Plastic Energy
23.
Development Of High Strength And Plasticity TRIP Seamless Steel Tube And Investigation Of Its Hydroformability
24.
Research On Deformation Mechanism And Equipment Development Of Rotary Blanking Process
25.
Experimental And Numerical Study Of Forming Limit Diagram Of AZ31Magnesium Alloy Sheet At Elevated Temperatures
26.
Study On The Shredding Of Thin Metal Scrap Based On Ductile Fracture Criterion
27.
Forming Process Research Of Gas Turbine Disk
28.
Simulation On Trimming Cut Forming Process Of Die Forging Blade And Optimal Die Design
29.
Theoretical And Numerical Study On Forming Limit Diagram Of AZ31Magnesium Alloy Sheet At Elevated Temperatures
30.
Research On Ductile Fracture Criterion Of Hot Stamping
31.
Research On The Adiabatic Shear In Serrated Chips Formation Based On Cutting Simulation
32.
Research On Phosphor Bronze Sheet Surface Quality Analysis And Control Of High-speed Blanking
33.
Modeling The Strain-Rate Dependent Yielding And Failure Behavior Of High Strength Steel Sheets
34.
Fracture Mechanism And Finite Element Simulation In Roll Forming Process
35.
Prediction And Control Of Fracture In Multi-point Press Forming Of Aluminum Alloy Integral Panel
36.
The Experimental And Numerical Investigation On Ductile Fracture Of A Pure Copper Under Tension-Shear
37.
Experimental Study On Mechanical Properties Of Static Fracture And Creep Fracture Behaviors Of Gypsum Interlayers In Corrosive Environmentn Of Brine
38.
Simulation And Analysis Of Extrusion Forming Process For Superalloy Blades
39.
Establishment And Application Of Fracture Criterion For 304 Stainless Steel Base On Average Stress Triaxiality
40.
Prediction Of Forming Limit For Square-cup Parts Of High Strength Steel TRB In Hot Stamping
<<First
<Prev
Next>
Last>>
Jump to
