heat-exchange tube - Globe Thesis

Keyword [heat-exchange tube] Result: 1 - 16 \| Page: 1 of 1
1.	Numerical Simulation Method Of Multi-physics Couping For Heat Exchange Tube And Fluid
2.	MFL Testing Of Heat-exchange Tube Based On 3D FEM And Experimental Study
3.	Design And Experimental Study Of Casing Type Air Gap Membrane Distillation Module
4.	Treatment Of Crackle On End Cap Of Heat Exchange Tube Set And Testing Of Fischer-tropsch Reactors And Gas Pressure In Tube Set Research And Implementation
5.	Study On The Performance Of Protective Coatings For Heat Exchanger Tubes Of Open-frame Heat Exchangers
6.	Preparation And Performance Study Of PVDF Full Plastic Evaporator
7.	Preparation Of PVDF Hollow Fiber Heat Exchange Tubes By Wet Spinning And Study On Heat Transfer Enhancement
8.	Based On The Design Of Fire Service With Liquid Cooling Active Cooling Effect
9.	Study On Stress And Vibration Characteristics Of Heat Exchanger Tube Bundles Based On Heat-fluid Coupling
10.	Analysis Of Pressure Signal In Suspended Preheating System Under Collapse Condition
11.	Optimization Design Of Steam Generator For Sulfuric Acid Low Temperature Waste Heat Recovery
12.	Research On Numerical Simulation Method Of Heat Transfer In Super Open-Frame Vaporizer Heat Exchange Tube
13.	Experimental Research And Structure Optimization Of DN3200 Organosilicon Fluidized Bed
14.	Thermal Fluid-Structure Coupling Analysis And Vibration Characteristics Of Coke Feed Preheater
15.	Study On The Surface Of Polymer Hollow Fiber Heat Exchange Tube Promoting The Removal Of Condensation Droplets
16.	Study On Fatigue Life Of Welded Joint Between Tube Sheet And Heat Exchange Tube
<<First <Prev Next> Last>> Jump to