Font Size: a A A
Keyword [loom]
Result: 1 - 20 | Page: 1 of 10
1. A Study On Occurrence, Development And Spreading Of Warp-floated Faced Tabby
2. Optimal Design Of Rapier Loom Main Shaft In Consideration Of Dynamic Characteristics
3. Research On The Weaving Method Of 3-D Fabric
4. The Researches And Development On Electric Weft Yarn Insertion System For Repair's Loom
5. Research On Scheme Of Eliminating Set Marks
6. Analysis Of The Oscillation And Turbulence Process Of The Four-bar Beating-up Mechanism With Motion Dual Clearance
7. The Effect To The Weaving Defects In The Let-off Mechanism Used For Silk Loom In The K251type And The Design Of Improved Project
8. Design And Analysis Of New Weft Insertion Mechanism In Rapier Loom
9. The Development Of The Selvage Apparatus And Control System On 3-D Loom
10. An Embedded Motion Controller And Its Application In Rapier Loom
11. The Air Loom Control System Based On ARM7 Embedded System
12. The Research And Development Of Electronic Let-off And Electronic Take-up System
13. Embedded System For Warp Tension Based On ARM7TDMI And UClinux Architecture
14. Dynamic Analysis Of A Two-side Four-bar Beating-up Motion Of An Air-jet Loom
15. The Rearch Of A Novel Electronic Let-off Control System
16. The Development Of 3-D Tube Loom Control System
17. Research On The Carpet Loom Control System Based On CAN Bus
18. The Study Of The Control System Of New Type Air Jet Loom
19. Study On The Terry Towel Weaving Device Of Shuttleless Towel Loom
20. Research On The Servo Control System Of Common Pneumatic Cylinder And Its Application In Automatic Sample Loom
  <<First  <Prev  Next>  Last>>  Jump to