Font Size: a A A
Keyword [recrystallization model]
Result: 1 - 20 | Page: 1 of 2
1. Study On The Process Optimization Of Pipe7050Al Alloy Extruding
2. Investigation On Microstructure And Performance Of TiC/Cu-Al2O3Electrical Contact Material Fabricated
3. Tantalum Wire Annealing Texture And Recrystallization Mechanism
4. Research On Hot Deformation Behavior Of Cr5 Steel And Microstructure Simulation Technology For Heavy Backup Roll Hot Forging Process
5. Microstructure Evolution And Fracture Behavior Of 316LN Austenitic Stainless Steel For Nuclear Power Plant During Hot Deformation
6. Research On Dynamic Recrystallization Behavior And Microstructure Simulation Of Q550D Ultra-Lowcarbon Bainitic Steel
7. The Study Of Dynamic Recrystallization And Static Recrystallization Behavior For50CrV4
8. Improvement Of Dynamic Recrystallization Model For Single-phase Materials Using Cellular Automata Method
9. Development Of Evolution Model For Hot Deformation Of 2.25CrlMo0.25V Steel
10. Research On Open-die Warm Extrusion Forming Process Of Spur Gear
11. The Deterministic Identification Of Deformation Mechanism In The Parameter Chaos Region And New Pattern Of Fine Crystallization Loading For TC4 Titanium Alloy
12. The Microstructure Analysis And Numerical Simulation For Hot Extrusion Forming Based On Thick-wall Pipe Of As-cast P91 Steel
13. Study On Microstructure Evolution Of 38MnVTi Non-quenched And Tempered Steel During Hot Deformation
14. Research On Microstructure Of Non Quenched Steel TL1438 During Hot Forming
15. Investigations On Precision Forming Technology And Manufacture Of Aviation Large Die Forgings
16. Research On Hot Deformation Behavior And Microstructure Of AF1410 Steel
17. Research On The Superplaticity Of Magnesium-lithium Alloy
18. Research On Hot Deformation Mechanisms And Dynamic Recrystallization Model Of Mg-Gd-Y-Zn-Zr Alloy
19. Microstructure Control Of Pure Copper And Its Influence On Electrochemical And Mechanical Properties
20. Comparative Study On Flow Behavior And Dynamic Recrystallization Process Of 300M Steel Under Tension-compression Stress
  <<First  <Prev  Next>  Last>>  Jump to