variable section - Globe Thesis

Keyword [variable section] Result: 1 - 20 \| Page: 1 of 2
1.	Study On Structure Behavior Of Raising Roller System In A Kind Of Raising Machine
2.	Research On Load-bearing Capacity And Safety Evaluation Of Derrick With Variable Section Leg
3.	Dynamic Fe Analysis On High-strength Steel Variable Section Roll Forming With Protrusion And Hole
4.	The Design And Research Of Variable Section Cold-formed Steel Cutting Device
5.	Roll Forming Simulation Of Variable Section Beam
6.	Variable-section Beam Roll Forming Machine Design Research
7.	Research Of Manufacturing And Bending Process And Parameter Optimization Of Variable-section Rectangular Tube
8.	Research On Simulation Of Directional Solidification Process And Control Of Microstructure Of Nickel-based Single Crystal Hollow Blades
9.	Key Parameters And Experimental Research Of High-Speed Milling Of Variable Cross-section Scroll
10.	Research On Milling Test And Parameter Optimization Of Variable Section Scroll
11.	Parameter Optimization And Experimental Study Of Finite Element Simulation For Variable Section Scroll Disk Milling
12.	Mechanics Modeling And Stability Analysis Of Variable Section Scroll Milling
13.	Numerical Simulation And Optimization Of SCR Denitrification System For Double Variable Section Flue Of 1000MW Unit
14.	Research On Forming Quality Of Thin-walled Conical Parts With Continuously During Spinning
15.	Study On Construction Mechanical Effect Of Soft Rock Geological Section Of Ta-zhong Gas Transmission Tunnel
16.	Prediction And Experimental Verification Of Surface Roughness Of The Sidewall Surface Of The Variable Section Scroll In High Speed Milling
17.	Hot Air Drying Chamber Door Automatic Lifting Device And The Design Of The Air Flow Uniform Air Supply And Research
18.	Research On Three-dimensional Surface Parts Rolling Based On Variable-section Curved Rollers
19.	Research On Influencing Factors Of Hot Cracking Sensitivity Of Mg-4Y-3Nd-xAl Magnesium Alloy
20.	Research On Processing And Properties Of A New Type Of Si-Cr Plate Spring Steel With Variable Thickness
<<First <Prev Next> Last>> Jump to