Font Size:
a
A
A
Keyword [DPM model]
Result: 1 - 18 | Page: 1 of 1
1.
Numerical Simulation And Optimization Of Closed-Wet Cooling Tower
2.
The Study Of New Middle/High Temperature Solar Spray-Type Steam Generator
3.
Investigation On Two-Phase Flow In Bearing Chamber Of Aeroengine
4.
Numerical Simulation Of Inertial Force Which Is In Differences In Rotational Motion
5.
The Study Of Large Enthalpy Difference Evaporative Cooling Condenser
6.
Research On Erosion Characteristics Of Wind Turbine Blades Under Sand-Wind Environment
7.
Numerical Simulation And Wear Analysis Of Solid-liquid Two Phase Turbulent Flow In Centrifugal Impurity Pump
8.
Design Calculation And Numerical Simulation Of Pneumatic Conveying Injector
9.
Settling And Erosion Study Of Sand-dust On The Surface Of Solar Photovoltaic Modules
10.
Study On Atomization Characteristics Of High-pressure Jet And Pulsed Jet In Supersonic Flow
11.
Simulation And Experimental Research Of High-temperature And Low-pressure Superheated Steam Generator
12.
Pedestrian Detection Based On DPM Model And Research On KCF Tracking Algorithm
13.
Prediction Model Of Oil Spill Diffusion In Deep Sea
14.
Experiment And Simulation Study On The Effect Of Wind-sand Sedimentation On The Performance Of Solar Cells
15.
Study On The Performance Of Cylindrical Seal Under Gas Liquid Two Phase Condition
16.
Optimal Design And Experimental Research On Supersonic Gas-Liquid Mixed Cleaning
17.
Simulation And Analysis Of Enhanced Heat Transfer Performance Of Phase Change Microcapsule Suspension Flow In Circular Tube
18.
Study On Durability Of Wind Turbine Blade Coating Based On Uncertainty Analysis
<<First
<Prev Next>
Last>>
Jump to
