Three-dimensional finite element method - Globe Thesis

Keyword [Three-dimensional finite element method] Result: 1 - 20 \| Page: 1 of 3
1.	A Biomechanical Research For The Causes And Strategy Of Thoracolumbar Pedicle Screws Failure---Analysis Using The Three-Dimensional Finite Element Method
2.	Three-dimensional Finite Element Analysis Of The Mandibular Fixed Partial Denture In Various Loading And Edentulous Span
3.	Study Of The Stress Distribution In The Temporomandibular Joint Affected By Tooth Wear With The Three-dimensional Finite Element Method
4.	The Effect Of Luting Agents On Stress Distribution Of The Cement-retained Implant Denture
5.	The Three-dimensional Finite Element Analysis Of Corrective Mechanism Of Reverse-curve Arch Wire
6.	An Evaluation Of The Bonding Quality Of Orthodontic Bracket Using Three Dimensional Finite Element Method
7.	The Effect Of Complete Dentures Finished According To Different Kinds Of Teeth Arrange Method On The Supporting Tissues Of Edentulous Jaws
8.	A Study On The Stress Distribution In The Temporomandibular Joint Affected By Tooth Wear With Three-Dimensional Finite Element Method
9.	The Reconstruction Of The Lumbar Spondylolisthesis Model And A Study Of Different Fusion Surgery Based On A Three-dimensional Finite Element Method
10.	A Measurement Of The Cuspal Inclination In The Maxillary Molars With Cracked Tooth Syndrome And Its Stress Analysis
11.	Study Of The Stress Distribution In The TMJ During Clenching With The Three-dimensional Finite Element Method
12.	An Analysis Of Post-Core Restoration With Different Materials And Ferrule By Three Dimensional Finite Element Method
13.	Study On Biomechanics Of Bilateral Condyles In Three Surgery Methods Of The Lateral Temporomandibular Joint Ankylosis By Three-dimensional Finite Element Method
14.	Three-dimensional-finite-element Analysis Of Fiber Post On Dentinal Stress Distribution Of The Root Of Maxillary Central Incisors
15.	Stress Analysis Of The Temporomandibular Joint During Mandibular Protrusive And Small Jaw Opening Movements With The Three-dimensional Finite Element Method
16.	Investigation Of Effects Of Pulp Chamber Preparation And Retention Form Of Restoration On Stress Distribution In Tooth After Root Canal Therapy By Three-dimensional Finite Element Analysis
17.	Biomechanics Research On The Micro-Implant Embedded Loading And Enhance Anchorage By Micro-Implant In Distalizing Molar
18.	Three-dimensional Stress Analysis Of The Periodontal Ligaments Of Cantilever Fixed Bridge Abutment Under Dynamic Loads By Finite Element Method
19.	A Dynamic Finite Element Analysis Of Stress Distribution In The Supporting Bone Of Mandibular Molar Fixed Bridge Abutment
20.	A Study Of MOD Cavity Restored With All-Ceramic Inlay Using The Three-dimensional Finite Element Method
<<First <Prev Next> Last>> Jump to