Font Size: a A A
Keyword [Titanium-alloy]
Result: 161 - 180 | Page: 9 of 10
161. Resveratrol-loaded TiO2 Nanotube Array Inhibits Inflammatory Response And Promotes Bone Repair And Its Mechanism
162. The Influence Of Micorwave On The Proliferation Of Satellite Cells
163. Preparation And In Vivo Study Of Selective Laser Sintering 3D Printed Titanium Alloy Implants
164. Antibacterial Properties Of TaN-Ag Composite Coatings On Medical Titanium Alloy Surface
165. Development Of New 3D Printing Cervical Intervertebral Fusion Cages And Preliminary Study On Animal Experiments
166. Preparation, Surface Modification And Preliminary Evaluation Of Two Kinds Of Medical Implants
167. The Initial Study On The Application Of 3D Printed Porous Titanium Alloy/plate Implant For The Repairment Of Comminuted Posterior Acetabular Wall Fractures With Bone Defect
168. Study On Antibacterial Properties And Biocompatibility Of The SLM-fabricated Cu-bearing Titanium Alloy
169. The Effect Of Titanium Dioxide Nano Film To Temperature Of Tissues Around Titanium Alloy Implants
170. Clinical Application Research Of 3D Printed Artificial Sternum In Reconstruction Of Chest Wall After Sternum Resection
171. Biosafety And Osseointegration Ability Of New Medical Ultrafine GrainĪ²-Type Titanium Alloys
172. Biomechanical Experimental Study On The Fixation Of Long Tubular Fractures In Animals With Titanium Alloy Pin And Carbon Fiber Resin Rod(Magnetic Resonance Compatibility) External Fixator
173. Analysis And Comparison Of Application Of PEEK And Titanium Alloy In Cranioplasty
174. Clinical Application Of Additive Manufacturing Personalized Titanium Alloy In Reconstruction And Reconstruction Of Mandibular Defects
175. Biological Behavior Of Osteoblasts Derived From Bmscs And MC3T3-E1 Cells In Titanium Alloy Scaffold Under LIPUS
176. Effect Of Pore Structure On Bone Ingrowth Into Porous Titanium Alloy Scaffolds Fabricated By 3D Printing: An In Vivo Animal Experiment
177. Study On The Surface Functionalization Of Medical Titanium Alloy And Its Antibacterial And Antifouling Properties
178. Cytotoxicity Of Gradient Composite Material Medical Titanium Alloy With Low Elastic Modulus
179. Osseointegration using a surface activated, PEEK-based endosteal dental implant
180. Application of Weakest Link Probabilistic Framework for Fatigue Notch Factor to Aero Engine Materials
  <<First  <Prev  Next>  Last>>  Jump to