The viscous oil-water hydrodynamics in a microchannel and phase equilibria of heavy oil and carbon dioxide gas have been investigated in connection with the enhanced recovery of heavy oil from petroleum reservoirs.;The oil-water flow was studied in a circular microchannel made of fused silica with an I.D. of 250 µm. The viscosity of the silicone oil (863 mPa.sec) was close to that of the gas-saturated heavy oil in reservoirs. The channel was always initially filled with the oil. Two different sets of experiments were conducted: continuous oil-water flow and immiscible displacement of oil by water. For the case of continuous water and oil injection, different types of liquid-liquid flow patterns were identified and a flow pattern map was developed based on Reynolds, Capillary and Weber numbers. Also, a simple correlation for pressure drop of the two phase system was developed.;In the immiscible displacement experiments, the water initially formed a core-annular flow pattern, i.e. a water core surrounded by a viscous oil film. The initially symmetric flow became asymmetric with time as the water core shifted off centre and also the waves at the oil-water interface became asymmetric. A linear stability analysis for core-annular flow was also performed. A characteristic equation which predicts the growth rate of perturbations as a function of the core radius, Reynolds number, and viscosity and density ratios of the two phases was developed.;Also, two micro cells for gas solubility measurements in oils were designed and constructed. The blind cell had an internal volume of less than 2 ml and the micro glass cell had a volume less than 100 µl. By minimizing the cell volume, measurements could be made more quickly. The CO2 solubility was determined in bitumen and ashphaltene-free bitumen samples to show that ashphaltene has a negligible effect on CO2 solubility. |