Lightweight Composite Armor Materials Processing Technology

With the development of defense-Tank weapon and the appearance of new-style weapon, the higher request for Tank-Armor has been put forward, which not only has the superior performance of defense-bullet, but also has the performance of light-weight, high-maneuverability, defense-fragments, defense-nucleus and so on. However the machining of light-composite armor material is still a dead-hand problem to be resolved, and so, this dissertation analyses and researches the mechanical-physics performance, the tissue-structure characteristics and the machining mechanism of light-composite-armor material (fiber-reinforced polymer-based composite and defense-bullet ceramics); Researches the machining technology of light-composite-armor material, developing the special cutters and special clamps . Researches the machining technology of light-composite-armor after molding, mainly resolving the drilling a hole and cut a straight-line of defense-bullet ceramics/fiber-reinforced polymer-based composite. Using the machining tools, which mainly include multiple-tools machining fiber-reinforced polymer-based composite holes and diamond saw-blade, diamond hole-drills machining defense-bullet ceramics and so on, researched in this dissertation, the machining-experiment of composite, defense-bullet ceramics and ceramics/composite was carried through, and good machining result was gained.