Cnc Winding Machine Equipment Modification And Control System

Composite material winding the component of preparation in modern flight production application is more extensive, as solid rocket engine housing and rocket engine spray pipe the propeller that section, artificial satellite, aerial radar cover and various flights use as well as the vessel of high voltage and pipeline etc. Because of modern technology develop fast, the flight speed of airplane, missile and rocket is more and more rapid, the thrust of missile and rocket engine is bigger and bigger. For adopting winding, the technical rectification cover as well as missile and rocket engine spray pipe and other light quality such as airplane radar cover, missile first awl and carrier rocket that made are high-strength, high temperature resistant, endure ablation, endure the property requirement concerning winding component that eroded with high speed is also higher and higher.For some special components are winding technology abroad is tight embargo blockade, is to cannot introduce more for control technology. Satisfy the spaceflight industry of our country develop demand fast, solution new a acting solid rocket engine develops and satisfies high property engine spray pipe as well as aerospace flight wares heat insulation, endure ablation parts to develop needs. Develop new, much axle and multifunction, much physical parameter to control, winding equipment, as well as improve perfect tape winding machine physical parameter inspection and control software has been urgent matter. The purpose of research is preparation for the new multifunction digital control tape winding machine.At first, analysis the reasons of low precision of multifunction digital control tape winding machine accoding to users' need, and put forward the effective solution one by one after analysing the tension, pressure and temperature control system respecttively. Secondly, carry on the transformation to the transmission of tension, reduce the interference to the control system of tension, have established the foundation of high accuracy control. Then, designe a rectifying deviation device, before this people rectified deviation manually, now this device has improved the automatic level greatly. Then, to tension, pressure, temperature, rectify a deviation control methods of the control system go on the pertinence design. Adopt computer distinguishing automatically, simulate tension control system, verifying the result after transforming. Software is improved to facilitate users to standard and use. Finally, a series of tests of rectify deviation, tension, temperature, and pressure are designed to validate the result.