Finite Element Analysis Of Laser Drilling Machine Beams

In order to achieve high-precision high-quality and high efficiency of laser drilling machine drilling requirements, Not only the laser beam energy of the laser generator, the waveform and the divergence angle and other parameters shall meet the high-speed, high precision,efficient punching deformation conditions, but also for the laser drilling machine machine tools, motion accuracy, bed and the heat of beams, also put forward strict requirements. The author commissioned by a company, discussed the processing errors of beam deformation caused by temperature rise for the laser drilling machine of some types, and the results meet the engineering requirements.To discuss the problem of temperature affect the accuracy of machine tools punch. The structural dimensions of beams according to a company to provide a model of laser drilling machines, Simplified screws and threaded holes surrounding, and a simplified three-dimensional solid model using UG software. According to the laser drilling machine processing environment, Using ANSYS thermal analysis software to get the temperature distribution of the beam, Based as the load of machine beam deformation.Then, the machine temperature will be loaded into the machine, as a body load, The simulation analysis of thermal deformation of the beam to get the stress and deformation of the machine beam cloud images. The results show that the beams meet the requirements of hole machining accuracy of0.015mm. Finally, the use of traditional theory to test the thermal deformation of machine beams. According to the results obtained, Temperature caused by the machine deformation slightly affect the punching accuracy and quality.From reality, I get the machine temperature distribution and deformation of the laser drilling machines in the course of their work. At the same time, verification and analysis of the deformation. The deformation results provide some reference to the design of the beam of laser drilling machine.