The Forming Process Of5A06Aluminum Alloy

Parts involved in this topic with complex internal structure, and it is not axisymmetric.Forming parts on the basis of our existing equipment, Aims to Weight loss on the premises ofpart excellent performance. This topic will be a certain reference value in weight loss of manysimilar parts, as well as the forming of complex cross-section parts.The research method is on MSC/superform-3D computer numerical simulationsoftware combined with experimental. Proposing preliminarily scheme is simulated.There are some problems in the analysis of simulation results, for example: Founding that thestiffener of workpiece folding. And our equipment do not have enough forming load. Newprocess scheme have be simulated as well as optimized. MSC/superformation of theworkpiece is uniform. Load reduced to about1200t from2800t, and it accord with simulationresults.By the influence of the initial temperature of billet, the extrusion rate and thecoefficient.The research could choose the most suitable process parameters optimization toimprove process to make up the deficiencies and defects.