Which Has The Function Of Pneumatic Automatic Insulating Glass Machine Mix One Gas Technology And Simulation

The assembling machine of insulating glass processing machine is one of the key equipment, and the inflation system is the important part of the assembling machine of insulating glass, not only determines the insulating glass production processes, but also determines the insulating glass processing quality. The thesis is on the market through the assembling machine of insulating glass inflation system research, knowledge of learning, the existing optimization and upgrading of the entire pneumatic system.First, the assembling machine of insulating inflation system works and its workflow. On this basis, inflation system at work analyzing the advantages and disadvantages. By reading the literature relevant content, respectively of the gas inflation system and control valves to optimize the design, It not only has the original inert gas filling mode-filling a single inert gas, and joined another filling mode-mixed inert gas proportional fill. Then the assembling machine of insulating adopts an open environment FLUENT fluid theoretical analysis and simulation, in order to determine the feasibility of using this method fills. Based on the above work, the inflation system analysis and research, in accordance with the control requirements for digital input, digital output, analog input, analog output, etc. related to Siemens PLC S7-300module selection. Adoption the Siemens PLC S7-300to match the software platform-SETP7software configuration, programming; WINCC configuration software design with the human-machine interface development, so as to satisfy the actual production plant safety and reliability.After the optimization and upgrading of the inflation system with inert gas and filled with a single inert gas mixed in proportion to the function. Not only greatly simplifies inflatable original path, but also makes inflatable diversification. By the FLUENT simulation, given the theoretical basis of the insulating glass is in open environment filled with inert gas. The results show that after the optimization and upgrading of inflation system can not only meet the actual needs of production, but also improve the efficiency of insulating glass production. This is filled with an inert gas, on the processing of hollow glass has a very important significance.