Development And Application Of Protective Wax Paper Packaging

Protective wax paper packaging is a new type of specialty wax products, mainly used in paper packaging moisture waterproof performance and extend product performance and safety and health performance adaptation. Most of the necessary raw materials for paper products protective equipment is more expensive, inconvenient to use some of the products, and even individual products toxic, odor, flammable, harmful, polluting the environment.This article is based cost-effective principle, the experiment to determine the best formula is:Mix the 60 and 66 semi-refined paraffin wax at the mass ratio of 1 to 1, use 1.5% AWE-3 and 1.0% B210 as additives, under heating and stirring synthesized products. Optimal synthesis conditions are:in the case of a well-stirred heated to 130 ℃, constant temperature and stirred for 20 minutes, to synthesize protective wax paper packaging. Product performance to reach the water, moisture sun and customer requirements.According to environmental requirements, the paper further synthesis of environmentally friendly paper products, packaging protective wax test to determine the best formula is:62 fully refined paraffin wax fully refined paraffin and 64 in a 1:1 ratio mixing, adding 2.0% additives C3 and 1.0% additive D2, under stirring and heating conditions synthesized products. Optimal synthesis conditions are:in the case of a well-stirred heated to 125 ℃, constant temperature for 25 minutes, synthesized paper products environmentally friendly packaging protective wax. Product performance to meet waterproof sunscreen and meet the quality requirements of FDA export easy.At the same time the paper for paper products packaging protective wax industrial production and application conditions were investigated to determine the production conditions:the temperature and pressure style blending complex way, using steam heating and electric heating HTF way, the melting temperature unit controlled at 95℃-100 ℃, the reaction unit and a thermostat controlled at 125℃-130 ℃ 30-35 minutes until the reaction was complete. Determine conditions:temperature of the molten wax at 125-130 ℃, and cost savings RMB8200yuan/t to customers.