Font Size: a A A

Natural fracture analysis related to depositional environment and strain variability in the middle and upper Williams Fork Formation, Piceance Basin, Colorado

Posted on:2014-11-17Degree:M.SType:Thesis
University:Colorado School of MinesCandidate:Lee, Edward CarlyleFull Text:PDF
GTID:2450390008455176Subject:Geology
Abstract/Summary:
As Americans continue to focus on the use of cleaner, and more efficient forms of energy, tight gas reservoirs like those in the Piceance Basin in Colorado are becoming increasingly important. The Williams Fork Formation is potentially capable of 1.2 BCF/day of natural gas production. With continued tight gas development in the Piceance Basin, and a better understanding on the controls behind zones of enhanced production, that contribution can be expected to grow. The understanding of natural fracture networks, and the drive to exploit their characteristics as migration pathways, will allow for more efficient gas production.;Laramide east-west compression resulted in the formation of regional sub parallel fracture networks within the Williams Fork Formation. Major and minor localized deformation resulted in the development of structurally derived fracture networks. At least three separate sets of fractures exist at outcrop, but the extent of these networks across different preserved depositional environments is poorly constrained.;Regional compressive stress directions were the primary control on fracture orientation. However, localized structures related to the Laramide deformation developed structural networks of extensional fractures that are orientated parallel to the axial trace of folds, and strike of normal faults. These locally derived structurally related networks in addition to the regional networks form overall tighter fracture spacing than bedding in lesser deformed portions of the Piceance Basin. Increased local deformation is associated with both normal surface faulting in the western Piceance Basin, and subsurface intrabasin imbricated thrust faults in the southern Grand Hogback area. Additionally, the depositional environment of a single bed controlled bed thickness and brittleness. Tighter average fracture spacing is associated with thinner, more brittle beds.
Keywords/Search Tags:Fracture, Piceance basin, Williams fork formation, Depositional, Related, Natural, Gas
Related items
Sequence stratigraphy of the upper cretaceous upper Williams Fork Formation, Piceance Basin, northwest Colorado, and its contribution to the basin-centered gas accumulation
Seismic investigation and attribute analysis of faults and fractures within a tight-gas sandstone reservoir: Williams Fork Formation, Mamm Creek Field, Piceance Basin, Colorado
Sequence stratigraphy of the Upper Cretaceous middle Williams Fork formation, Piceance Basin, northwestern Colorado: Implications for reservoir sandstones
Subsurface Stratigraphy of the Upper Cretaceous Lower Williams Fork Formation, Piceance Basin, Northwestern Colorado
Petrophysical evaluation of lithology and mineral distribution with an emphasis on feldspars and clays, middle and upper Williams Fork Formation, Grand Valley Field, Piceance Basin, Colorado
Fluvial architecture and sequence stratigraphy of the upper Williams Fork Formation, Plateau Creek Canyon, Piceance Basin, Colorado
Sedimentological and stratigraphic characteristics of fluvial sandstones based on outcrop spectral-gamma-ray data and borehole images, Williams Fork Formation, Piceance Basin, Colorado
Sandstone-body connectivity in a meandering-fluvial system: An example from the Williams Fork Formation, Piceance Basin, Colorado
Stratigraphic architecture of shallow-marine to coastal-plain parasequences: Lower Williams Fork Formation, southeastern Piceance Basin, Colorado
10 Stratigraphic architecture and connectivity of a low net-to-gross fluvial system: Combining outcrop analogs and multiple-point geostatistical modeling, lower Williams Fork Formation, Piceance Basin, Colorado