"internally ribbed tube" - Globe Thesis

Keyword ["internally ribbed tube"] Result: 181 - 200 \| Page: 10 of 10
181.	FEM Analysis And Structure Optimization Of Eccentricity Swelling Tool
182.	The Study On The Technology Of Integration Operation That Combines The Oil Tube Feeding Perforation And The Capital String
183.	Experimental Study On Middle-water Recycle Reclaimed And Integration Facility Of Middle-water Treatment With Filtration And Disinfection In Residential Areas
184.	Study On The Technology And The Prevent Fouling Property Of Electroless PTFE Composite Plating Of Fuel Tube
185.	Welding Repair Technology For Life Extension Of Ethylene Cracking Furnace Tubes
186.	Fabrication Of NiTi Alloy Tube With Hot Extrusion And Improvement Of Its Properties Under Environmental Field
187.	Experiment Research On Key Technology Of Laser Cutting Technology
188.	Research And Development Of Progressive Edge Bending Forming Process And Mould For Long Circular Tubes
189.	Study On Extrusion Process Parameters And Deformation Mechanism Of AM50 Alloy Tube
190.	Optimized Simulation Research On Forming Technology And Mold Structure Of Thin-walled Irregular Tube
191.	Study On The Hydrodynamics Behavior Of Spout-fluid Bed With A Draft Tube
192.	Research On Optimization In Precision NC Bending Process Of Thin-Walled Tube
193.	Research Of Absorption Heat Transformer With Falling Film Inside Tubes
194.	FEPG-Based Exploitation Of Finite Element Program And Stress Analysis Of The Kettle-Type Reboiler With Fixed Tubesheet
195.	Effect Of Interfacial Behavior Between Polymer And Oil Upon Displacement
196.	Phase Transformations Of Ni-P Alloy Under Extreme Conditions
197.	Research On The Defects For Horizontal Continuous Casting Of TP2 Copper Tubes
198.	The Study On Tube Extrusion Forming Technology Of Magnesium Alloy AZ31
199.	Study Of Forming Rules In Spline Tube Extrusion
200.	The Simulation And Information Transformation Of NC Tube Bending Based On Triangle Arithmetic
<<First <Prev Next> Last>> Jump to