Font Size: a A A
Keyword [Active disturbance rejection control]
Result: 1 - 20 | Page: 1 of 3
1. Research On Key Techniques Of Fast Tool Servo Turning
2. The Fabrication And Active Disturbance Rejection Control Of The IPMC’s Serial And Parallel Actuators
3. Research On Active Disturbance Rejection Control And Its Application On Polymerization Reactor
4. Research On Active Disturbance Rejection Control Application In Wastewater Treatment Process
5. Experimental Study On Position Synchronous Control Of The Internal High-pressure Forming Equipment
6. Study On Characteristic Analysis And Control Measures Of Rolling Mill Vertical-torsion Coupling Vibration
7. Active Disturbance Rejection Control Theory And Applications In Cold Strip Rolling Mill
8. Study On Challenge Technologies Of Multiplexed Force-Displacement Control In Pneumatic Servo System For Resistance Spot Welding
9. Study On Fluid Power Transmission System Control Characteristics Of 60MN Hydraulic Press
10. The Control System Design Of Acetylene Hydrogenation Reactor Based On MVC~3
11. Design Of Tunnel Kiln Temperature Control System Based On Active Disturbance Rejection Control
12. Compound Active Disturbance Rejection Control For Dynamic Positioning Of Semi-submersible Offshore Platforms
13. Research On Torsional Vibration Control Of Strip Rolling Mill Main Drive Nonlinear System
14. Study On Control Systems Of Rolling Mill Vertical-Torsion Coupling Vibration
15. Modeling And Control Of Piezoelectric Actuator Based On Active Disturbance Rejection Control
16. Research On Active Fault Tolerant Control For Sensor Fault In Multi-motor Synchronous System Of Stage
17. Study On Parameter Optimization, Measurement And Control Technology For CO2 Supercritical Extraction
18. Research On Synchronization Motion Control Of Dual-drive System In Gantry-type Stage
19. Research On The Theory And Method Of Side Roll Displacement Control Of Four-roller Plate Bending Machine
20. Research On The Active Disturbance Rejection Control Of The Detection Test Bench Of The Oil Film Thickness For Lathe Hydrostatic Slide
  <<First  <Prev  Next>  Last>>  Jump to