Keyword [Al-based alloys] Result: 21 - 40 | Page: 2 of 3 |
21. | Chemical Component Design, Microstructure And Mechanical Properties Of Zr3Al-based Alloys |
22. | Hot Corrosion Behavior Of Ni-Cr-Al Based Alloys And Its Corrosion Behavior In Solutions |
23. | Thermodynamic Study Of The Phase Equilibria In The Mg-Al,Mg-Zn Based Alloys |
24. | The Evolution Of Al3BC And Its Strengthening On Mg-Al Based Alloys |
25. | Study On The ECAP Deformation Of Different Second Phase In Mg-Al Based Magnesium Alloys And Its Effect On Performance |
26. | Influence Of C Addition On The Glass Forming Of Amorphous Al-based Alloys |
27. | Experimental Investigation And Thermodynamic Modeling Of The Na-X (X=Si, Ag, Cu, Cr) And Al-Fe-Ni-Si Systems In Al Alloys |
28. | Effects Of Boron On Microstructures And Mechanical Properties Of Zr3Al-based Alloys |
29. | Preparation, Microstructure And Mechanical Properties Of Zn-22wt.%Al Based Alloys And Tubes |
30. | Study On The Preparation Of Aluminium-based Amorphous Powder And Its Application In Reactive Material |
31. | Experimental Investigation And Thermodynamic Modeling Of The Sc-Ni,Al-Li-Zr And Al-Sc-Zr Systems In Al Alloys |
32. | Research On The Refining Mechanism Of Al4C3 On Mg-Al Based Alloys And Its In-situ Synthesis |
33. | Relative Research On Melt Viscosity And Elasticity And Thermal Stability Characteristics Of Rapidly Solidified Al-based Alloys |
34. | Composition Design And High-temperature Microstructural Stability Of Fe-Cr-Al-based Alloys Based On A Cluster Model |
35. | Nitrate Reduction In Water By Al-based Alloys Particles |
36. | The Effect Of Fe,Sn,Si Alloying Elements On The Damping Capacity Of Mn Cu-Al Based Alloys |
37. | Study On The Microstructures And Mechanical Behavior Of Ti-47Al-2Nb-2Cr-(Er,C,Mn) Directionally Solidified By Cold Crucible |
38. | Investigating On Hydrogen Storage Performance And Mechanism Of High Magnesium Content Mg-Al Based Alloys |
39. | Study On Friction Wear And Corrosion Properties Of Fe3Al Based Alloys |
40. | Experimental and Theoretical Investigation of Ultrasonic Cavitation Processing of Al-based Alloys and Nanocomposite |
|