Font Size:
a
A
A
Keyword [AlCrN]
Result: 1 - 20 | Page: 1 of 2
1.
Study On The Tribological Behaviors Of Physical Vapor Deposition (PVD) Coatings
2.
Effect Of Rear Earth On The Structure And The Performance Of AlCrN Films Used Vacuum Arc Deposition Technology
3.
Optimization Design Of The Cemented Carbide Saw Blade Which Is Applied To Difficult-to-Cut Metallic Material
4.
Effect Of Bias Voltages And Nitrogen Partial Pressure On AlCrTiSiN/AlCrN Films Deposited By Arc Ion Plating
5.
Study On Friction And Wear Properties Of CrN And AlCrN PVD-Coatings Under Rotational Wear Condition
6.
Effect Of Al Content In The High Power Engine Piston Ring On The Performance Of AlCrN Coating
7.
Development Of Modulated Pulsed Power Magnetron Sputtering System And Preparation Of Alcrn Films
8.
The Preparation Of Multi-component Nitride Coatings And Cutting Performance For High-speed Dry Milling
9.
Research On Structure And Mechanical Properties Of Electromagnetic Excitation AlCrN Hard Films Deposited By Multi-arc Ion Plating
10.
CrN, AlCrN And AlCrSiN Coatings Deposited By High Power Impulse Magnetron Sputtering
11.
Fabrication And Tribological Behaviours Of Micro-nano Textures On The AlCrN Coatings
12.
Study On The Preparation Process And Mechanical Properties Of Plasma Nirtrocarburizing And AlCrN Duplex Coatings
13.
Fabrication And Properties Of Textured Tools Deposited With AlCrN Coatings
14.
Cutting Performance Of High Aluminum Superhard Coatings Prepared By Multi-arc Ion Plating With Ion Source Enhancement
15.
Characteristics Of High Pulsed Current Arc Discharge And Deposition Of AlCrN Thin Films
16.
Tribological Properties Of CrN And AlCrN Thin Films Deposited By Physical Vapor Deposition
17.
Research On Preparation And Milling Performance Of AlTiN/AlCrN Coated Cemented Carbide Milling Cutter
18.
Preparation Of AlCrN-based Solar Selective Absorbing Coatings By CAIP And Optical Property
19.
Fabrication And Properties Of AlCrN/AlTiSiN Nano-layered Coatings On Cutting Tools
20.
Investigation On Preparation And Performance Of AlCrN-based Coatings Using For Machining Of Difficult-to-cut Materials
<<First
<Prev
Next>
Last>>
Jump to
