Attitude measurement - Globe Thesis

Keyword [Attitude measurement] Result: 1 - 20 \| Page: 1 of 2
1.	Study Of Non-orthogonal Coordinate Measurement Technology For Vertical Tool
2.	Study On The Theory And Method Of Relief Well Electromagnetic Detection
3.	Improvement And Verification For Analog Computation Of Attitude Parameters Of Rotary Steering Drilling Tool
4.	Characterization Of Non-orthogonality Attitude Position Error
5.	Attitude Measurement Method Of Automatic Vertical Steering Drilling Tools Under The Vibration Environment
6.	Research On Attitude Measurement Method Of Control Shaft For Point-to-the-bit Rotary Steering Drilling Tools
7.	Attitude Measurement And Correction Of Downhole Tool Based On MEMS Technology
8.	Analog Decoupling And Calculation Of Downhole Tool Attitude Measurement
9.	Down-hole Attitude Signal Acquisition And Large Capacity Storage
10.	Attitude Dynamic Measurement Of Directional Drilling Tools Based On Quartz Flexible Accelerometer
11.	Multi-channel Low-power Data Acquisition And Processing Of Downhole Tool Attitude
12.	Research On Multi-sensor Combined Measurement Method For Steering Drilling Tool
13.	Research On Microtubule-Microsphere Assembly Based On Multi-Channel Microvision
14.	Research On Key Technologies Of Load Identification And Attitude Control Of Full-face Shaft Boring Machine
15.	Research On Trinocular Visual Position And Attitude Measurement Technique For Non-cooperative Target
16.	Research On Fault-tolerant Technology Of Vertical Steering Drilling Tool Attitude Measurement
17.	Research On Numerical Solution Method Of Euler Angle Attitude Equation Of Steering Drilling Tool
18.	Research On Position And Attitude Determination Method Of Fully-mechanized Coal Winning Machine Based On Inertial Navigation
19.	Multi-degree-of-freedom Attitude Sensing System Of Ball Joint Based On Magnetic Measurement
20.	Research On Spatial Position And Attitude Measurement Methods Based On Infrared Vision Guidance And Laser Ranging
<<First <Prev Next> Last>> Jump to