Austenitic steel - Globe Thesis

Keyword [Austenitic steel] Result: 1 - 20 \| Page: 1 of 3
1.	Metallurgical Sources And Restrictive Methods Of Cryogenic Intergranular Brittleness In High Manganese Austenitic Steels
2.	Study On Microstructure And Properties Of The Welded Joint For Super304H Austenitic Steel
3.	Beheviour Of A Cr-Mn-N Austenitic Steel Under Cold And Hot Deformation Conditions
4.	Research Of Narrow Pulse Tranducer Used In Ultrasonic Testing Of Austenitic Steel Welds
5.	Precipitation In Advanced Heat-resistant Austenitic Steel HR3C
6.	Research On Cold Forming And Bearing Capacity Of Austenitic Cold-stretching Pressure Vessels
7.	Research On Technique And Application In Phased Array Technology At Austenitic Steel Weld Inspection
8.	Study On Martensite Microstructure And Properties Of Austenitic Steel After Cold-rolling And Annealing
9.	Development And Performance Analysis Of Special Welding Material For Austenitic Steel And Pearlitic Heat Resistant Steel
10.	Study On The Design Basis In The High Specific Strength Of Fe-mn Based Austenitic Steel
11.	Research On The Features Of Noise Signals From Ultrasonic TOFD Testing Of Austenitic Steel Welds
12.	As-cast Microstructure And Hot Deformation Behaviors Of Modified Ultra High Nitrogen Austenitic Steel For Retaining Rings
13.	Correlations Between Microstructures And Performances Of Friction Stir Welding/processing Alloys With High Melted Point
14.	Study Of C+N Enhancing Alloying Austenitic Steel And Its Mechanical Behaviours
15.	High Temperature Strengthening Of Aluminium Contained Austenitic Steel Used In700℃Ultra-supercritical Power Station
16.	Study On The Precipitation Mechanism And Strengthening Mechanism Of Vanadium Carbide In High Manganese Austenitic Steel
17.	Phase Diagram And As-cast Structure Characteristics Of A High Nitrogen Crmn Austenitic Steel Containing V And Nb
18.	Effect Of Microstructure And Properties Of Plasma Cladding Fe-Cr-Ni Coatings On High Manganese Steel Substrate
19.	Study On Corrosion Behavior Of Three Kinds Of Austenitic Steels In Simulated Flue-gas/Coal-ash Environments
20.	Study On The Welding Process Optimization Of Pearlitic Steel And Austenitic Steel And The Joint Performances
<<First <Prev Next> Last>> Jump to