Font Size: a A A
Keyword [Axial force]
Result: 81 - 100 | Page: 5 of 6
81. Experimental Research On Additive Forming And Drilling Of TC4 Titanium Alloy
82. Study On The Friction Plug Welding Process Of 6082 Aluminum Alloy
83. Yield Failure Process Of 1000m Middle Horizontal Pillar In Jinchuan No.2 Mine And Its Influence On The Stability Of The Roadway
84. The Improved Design Of Cutting Tool To Restrain Delamination Of Exit In Helical Milling On CFRP
85. Research Of Inner Flow In Mine Multi-stage Emergency Drainage Pump And Rotor Dynamics On Pump Set
86. Monitoring The Condition Of Drilling Tools For Carbon Fiber Composite Materials
87. Theoretical and experimental study of buckling behavior of coiled tubing and axial force transfer modeling in coiled tubing drilling
88. Study On Blade Parametric Design And Internal Rotor-Stator Cavity Unstable Flow Characteristics Of Electrical Submersible Pump
89. Analysis Of Axial Force Balance Characteristics And Optimization Of Hydraulic Performance Of Double-case Multistage Centrifugal Pump(BB5)
90. Research On Drilling Process Of Carbon Fiber Composites
91. The Research On Drilling Technology Of Carbon Fiber Composites For Robot
92. Experimental Study On High And Low Frequency Compound Vibration Drilling Of CFRP/Titanium Alloy Laminated Structure
93. Experimental Study On Ultrasonic Vibration Assisted Drilling Of CFRP
94. Evolution Of Anchorage Performance Of Resin Anchored Bolt Influenced By Polyester Film
95. Study On Deformation And Failure Characteristics Of Composite Roof Roadway And Optimization Of Bolt Support Technology
96. Research On A Kind Of Liquid Filled Passive Discolored Bolt Axial Force Monitoring Sensor
97. Research On Drilling Technology Of GH4169 With Machine-clamped Deep Hole Drill
98. Design Of Closed-loop Control System For Axial Force Of High Rotation Speed Friction Stir Welding And Optimization Of Process Parameters
99. Research On Axial-force Control Of 6061-T6 Aluminum Alloy Sheet In HR-FSW
100. Friction Stir Welding Of Dissililar Materials And The Control Of Joint Quality
  <<First  <Prev  Next>  Last>>  Jump to