CONFORM - Globe Thesis - Globe Thesis

Keyword [CONFORM] Result: 21 - 35 \| Page: 2 of 2
21.	Study On Preparation Technology And Equipment Improvement Of Spray Deposition Continuous Extrusion Al - 20Si Alloy
22.	Microstructure And Properties Of Al - 20Si Alloy Prepared By Spray Deposition Continuous Extrusion
23.	Study On Microstructure And Properties Of High-silicon Aluminum Alloys Prepared By Spray Conform
24.	Study On Microstructure And Property Of Al-Zn-Mg-Cu Alloy Prepared By Spray Conform
25.	Microstructures And Mechanical Properties Evolution Of An Al-0.74Fe-0.23Cu Alloy Processed By Repetitive Continuous Extrusion Forming
26.	Preparation Technology And Performance Characterization Of UFG Copper Alloy
27.	Numerical Simulation And Experimental Study Of Constrained Spray Deposition Process
28.	Study On Preparation Of Al-Ag-Sc-Zr Wire By Continuous Rheo-extrusion And Thermomechanical Treatment
29.	Microstructure And Mechanical Property Of The Pre-aged 6201 Aluminum Alloy Processed By R-Conform Process
30.	The Effect Of Iron Content On The Structure And Properties Of Spray-deposited Continuous Extrusion High-silicon Aluminum Alloy
31.	Research On Microstructure,property And Deformation Mechanism Of Al-Mg-Si Alloys After Severe Plastic Deformation Based On Continuous Extrusion Forming
32.	Microstructure And Properties Of Nanostructured Cu-Cr-Zr Alloy Prepared By SPD And Deep Cryogenic Treatment
33.	Effect Of Cold Rolling And Annealing On Microstructure And Properties Of M2 Cu Processed By ECAP-C And Its Physical Mechanism Of Action
34.	Study On The Microstructure And Properties Of Al-Ti-C Alloy Processed By Conform-ECAP
35.	Microstructural Evolution Of High-silicon Aluminum Alloys Prepared By Spray Deposition And Continuous Extrusion
<<First <Prev Next> Last>> Jump to