Font Size: a A A
Keyword [Casting composite]
Result: 1 - 20 | Page: 1 of 2
1. Research On The Manufacturing Process, Microstructure And Mechanical Properties Of WC/Steel-Based Composites Made By Electroslag Melting And Casting Method
2. TiB2+SiC Particles Hybrid Reinforced ZL109 Composites
3. Study On The Lfc Process Of Composite Wear-resistant Bend Pipe With High Chromium Cast Iron - High Manganese Steel
4. ZM5/ZL102Composites Forming And Its Performance Study
5. Electromagnetic Rapid Casting Composite Magnetic Field Analysis And Aluminum Billet Microstructure And Properties Of Experimental Study
6. Fast Casting Aluminum Electromagnetic System, The Magnetic Field Analysis And Special Power Supply Control System Simulation
7. Research On Process And Microstructure Of Electromagnetic And Ultrasonic Composite Energy-field Roll Casting1060Al Alloy Plate
8. Research On The Composite Interface And Composite Material Properties Of4045/3004/4045Clad Aluminum Alloys
9. Effect Of Composite Fiber Content On Properties Of Silicon Sol Slurry And Shell Reinforced By Fiber For Investment Casting
10. The Research Of Composite Processing Technology Of The Oil Casting Using Micro-edm And ECM
11. Numerical Simulation On Composite Forming Process Of Forging And Casting For Automobile Rear Axle Spiral Bevel Gear
12. Study On Technology And Performance Of Lead - Steel Layered Composites Prepared By Low Pressure Casting
13. Numerical Simulation And Process Research For Centrifugal Casting Composite Bimetallic Pipe
14. Preparation Of Thin Film Composite Filler And Its Application In Sic Ceramic Joining
15. Effect Of Different Proportion Of Composite Fiber Corundum Sand On Properties Of Silica Sol Shell
16. Study On Microstructure Control And Properties Of Tin Bronze-steel Bimetal Composite Plate
17. Low Carbon Modeling Of Patternless Sand Casting Process And Optimization Design Of Composite Mold
18. Composite Casting Technology In The 5×××/7××× Aluminum Alloy Planar Solidification
19. Design Of High-speed Through Ground Wire Equipment By Continuous Pouring Process For Clad
20. Modularization And Structural Lowcarbon Optimization Design Of Composite Mold For Patternless Sand Casting
  <<First  <Prev  Next>  Last>>  Jump to