Font Size:
a
A
A
Keyword [Ceramic tool]
Result: 81 - 100 | Page: 5 of 6
81.
Study On Preparation And Properties Of Si
3
N
4
Cutting Tool Based On Phase And Microstructure Tailoring
82.
Research On Surface Integrity Of High-Speed Milling Nickel-Based Superalloy By Self-lubricating Ceramic Tool
83.
Research On The SPS Preparation Process And Cutting Performance Of Silicon Nitride-based Ceramic Tools
84.
Microwave Two-step Sintering Of Fine-grained Alumina-based Ceramic Tools And Their Cutting Performance
85.
Microgrinding of ceramic materials
86.
Study On TiCN-based Ceramic Tool With A Core-rim And Particle Dispersion Microstructure And Tool Cutting Performance
87.
Research On Al
2
O
3
@RGO Core-Shell Ceramic Tool And Its Cutting Performance
88.
Investigation On The Fabrication And Cutting Performance Of Graphene/Al
2
O
3
Matrix Composite Ceramic Tool Based On Interfacial Regulation
89.
Study On Surface Quality Of Nickel-base Single Crystal Alloy ACS Cutting By Ceramic Tool
90.
Study On The Fabrication Of Biomimetic Laminated Graphene Composite Ceramic Cutting Tool And Its Cutting Performance
91.
Preparation Of Si
3
N
4
/TiC-based Ceramic Tools By SPS And Their Self-Repairing And Self-Lubricating Properties
92.
Coated Self-lubricating Ceramic Tools Material: Molecular Dynamics Analysis And Preparation
93.
Development And Properties Of Graphene/Al
2
O
3
-based Ceramic Cutting Tool
94.
Research On Preparation And Performance Of α-Sialon-Based Ceramic Tool Material
95.
Development Of TiB
2
/Ti(C
0.5
,N
0.5
)/Al
2
O
3
Composite Ceramic Tool Material And Research On Its Cutting Performance
96.
Study Of Molecular Dynamics Of Al
2
O
3
/TiC Composite Ceramic Tool Interface
97.
Preparation And Application Of Al
2
O
3
-based Composite Ceramic Cutting Tools Machinability Study
98.
Prediction Of Performance Of Composite Ceramic Tool Materials At Microscopic Scale
99.
Research On Al
2
O
3
-based Ceramic Tool Materials Toughened By In-situ Synthesized Whiskers
100.
Research On High Performance Si
3
N
4
-based Ceramic Tool Materials And Properties
<<First
<Prev
Next>
Last>>
Jump to
