Chip morphology - Globe Thesis

Keyword [Chip morphology] Result: 1 - 20 \| Page: 1 of 3
1.	Deformation Control And Error Compensation In Precision Machining Of Thin-Walled Parts
2.	Experimental Research On Turning Process And Surface Integrity With Minimum Quantity Lubrication
3.	High Speed Grinding Mechanism Of Nickel Superalloy With Single Abrasive Grain
4.	Influence Of Surface Bionic Tool On Stainless Steel Chip Morphology
5.	Investigation Of Mechanism In High-speed Milling Of Nickel-Based Superalloy GH706
6.	Stainless Steel The 1cr18ni9ti The High-speed Turning Pilot Study
7.	Research On Cutting Performance Of Turning Compacted Graphite Iron By PCBN Superhard Inserts
8.	Investigations On The Machinability Of Titanium Alloy TC25 In High Efficiency Milling
9.	Investigation Of Tool Crater Wear And Plastic Deformation In Metal Cutting
10.	Study On Microcutting Mechanism Based On Minimum Uncut Chip Thickness
11.	Chip Morphology And Tool Wear In Deep-hole Drilling For The EA4T Railway Axle
12.	Investigation On Process Geometry And Surface Topography For Multi-axis Ball End Milling Of Mold Steel
13.	Finite Element Modelling On High-speed Milling Process Of Titanium Alloy
14.	Study On The Mechanical Properties Of Titanium Alloy TC17and Characteristics In Machining
15.	The Characteristics Of Tool Wear Behavior Research In High-speed Turning Of Near αhigh Temperature Titanium Alloy BTi6431S
16.	Experimental Study On Ultrasonic Elliptical Vibration Assisted Turning Of Slender Shaft
17.	Research On Grinding Mechanism Of Carburized Alloy Steel 20CrMo Based On Single CBN Abrasive Grain
18.	Theoretical And Experimental Investigations On Ultrasonic Vibration Assisted Turning Of Difficult-to-Cut Materials
19.	Experimental And Simulation Research On Cutting GH4169 With PCBN Tool
20.	Simulation Analysis Of Deep-hole Drilling Process With BTA Drill Based On DEFORM-3D
<<First <Prev Next> Last>> Jump to