Font Size:
a
A
A
Keyword [Chip morphology]
Result: 21 - 40 | Page: 2 of 3
21.
Study On Influence Of Chip Shape On Vibration Characteristics Of Cutting Tool
22.
Experiment Research On High Speed Machining Compacted Graphite Cast Iron With Hard Brittle Tools
23.
Experimental Study On Textured Tool For Milling Ti6Al4V
24.
Drilling Damage Mechanism Of CFRP/Ti Stacks Based On Hole Wall Quality And Accuracy And Damage Suppression Technology
25.
Experimental Study On High-speed Drilling Of Ti6Al4V With Micro-textured Internal Cooling Twist Drill
26.
Thermal Behavior Analysis And Experimental Research Of KDP Crystal Cutting Process
27.
Research On The Cryogenic Cutting Machinability And The Chip Morphology Of Difficult-to-Cut Alloys
28.
Study On Cutting Forces,Chip Morphology,Tool Wear Of Amorphous Alloy In Orthogonal Free Cutting
29.
Study On Laser-assisted Cutting Performance Of Fused Silica
30.
Research On Physical Simulation And Experiment Of Cupronickel B10 In High-Speed Cutting
31.
Mechanism Of High Speed Cutting Based On Split Hopkinson Bars
32.
Study On Vibration Assisted Drilling Of Carbon Fiber Reinforced Plastic And Titanium Stacks
33.
Study On Deep-Hole Machining Surface Integrity Of Nuclear Power Steam Generator Tube Sheet Materials And Drill Wear
34.
Ultrasonic Vibration Milling And Surface Quality Control Of Cr12MoV Die Steel
35.
Study On The Effect Of Chamfer Structure On The Milling Performance Of Hardened Steel
36.
Experimental Study And Element Simulation Of The Sawtooth Chips Morphology In Whirlwind Milling Process Of Screw
37.
Study On Chip Curling And Chip Morphology Of Ti-5553 Titanium Alloy Under Different Cooling Strategies
38.
Research On The Adiabatic Shear And Plastic Deformation Of Difficult-to-cut Materials In Cutting Process
39.
An analytical and experimental investigation into chip morphology in orthogonal machining
40.
Experimental Investigations On Micro Grinding Characteristics And Technological Basis Of Bulk Metallic Glasses And High Entropy Alloys
<<First
<Prev
Next>
Last>>
Jump to
